Volt seconds to Maxwells Converter (V·s to Mx)

Rate this converter

Instant calculation with 0ms overhead

Popular Converters

Live Conversion • ISO 80000-6:2022 Certified

1 Volt second = 1 × 10⁸ Maxwell

1 V·s = 1 × 10⁸ Mx • 1 Mx = 1 × 10⁻⁸ V·s

Decimals:

Certified Authority Value

100000000.00000000

From / Input

V·s

Swap to Maxwell to Volt second

To / Result

Quick Values:

Conversion Formula

To convert Volt second to Maxwell, multiply by 1 × 10⁸

V·s × 1 × 10⁸ = Mx

Calculation: 1 V·s × 1 × 10⁸ = 1 × 10⁸ Mx

Common Volt second to Maxwell Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Volt second (V·s) and Maxwell (Mx).

Tap any row to calculate

Volt second to Maxwell: Primary Direct Table (15 Steps)

Rule: 1 Volt second is equal to 1 × 10⁸ Mx (Maxwell)

Volt second to Maxwell Conversion Reference Table
Conversion & Equivalent Value	Scientific Notation
0.001 V·s 100000 Mx	1 × 10⁵
0.01 V·s 1000000 Mx	1 × 10⁶
0.1 V·s 1 × 10⁷ Mx	1 × 10⁷
0.5 V·s 5 × 10⁷ Mx	5 × 10⁷
1 V·s 1 × 10⁸ Mx	1 × 10⁸
2 V·s 2 × 10⁸ Mx	2 × 10⁸
5 V·s 5 × 10⁸ Mx	5 × 10⁸
10 V·s 1 × 10⁹ Mx	1 × 10⁹
20 V·s 2 × 10⁹ Mx	2 × 10⁹
25 V·s 2.5 × 10⁹ Mx	2.5 × 10⁹
50 V·s 5 × 10⁹ Mx	5 × 10⁹
100 V·s 1 × 10¹⁰ Mx	1 × 10¹⁰
250 V·s 2.5 × 10¹⁰ Mx	2.5 × 10¹⁰
500 V·s 5 × 10¹⁰ Mx	5 × 10¹⁰
1000 V·s 1 × 10¹¹ Mx	1 × 10¹¹

Maxwell to Volt second: Reciprocal Summary

Rule: 1 Maxwell is equal to 1 × 10⁻⁸ V·s (Volt second)

Maxwell to Volt second Conversion Reference Table
Reciprocal & Equivalent Value	Scientific Notation
1 Mx 1 × 10⁻⁸ V·s	1 × 10⁻⁸
5 Mx 5 × 10⁻⁸ V·s	5 × 10⁻⁸
10 Mx 1 × 10⁻⁷ V·s	1 × 10⁻⁷
50 Mx 5 × 10⁻⁷ V·s	5 × 10⁻⁷
100 Mx 1 × 10⁻⁶ V·s	1 × 10⁻⁶

View Complete 15-Row Maxwell to Volt second Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Volt second (V·s) and Maxwell (Mx):

Volt second References:

Equivalent to weber: High-frequency ferrite flyback transformer 0.005 V·s

Maxwell References:

CGS magnetic flux: Miniature quartz wristwatch stepping motor 5000 Mx
Small ferrite permanent magnet surface magnetic flux 20000 Mx

Tap any benchmark above to automatically calculate its exact equivalent in Maxwell.

ISQ Dimension: [M L² T⁻² I⁻¹] Coherent SI Unit: weber (Wb) Electromagnetism, Circuits & Field Theory

How to Convert Volt second to Maxwell

Converting Volt second (V·s) to Maxwell (Mx) is a core calculation in Magnetic Flux, which measures the total magnetic field passing through a given surface area. This calculation bridges modern MKSA metric standards with the historical Gaussian centimetre-gram-second (CGS) electrostatic and electromagnetic framework. In CGS systems, electromagnetic units (such as statvolts, abvolts, dynes, ergs, and gauss) are formulated directly from mechanical dimensions, with electrostatic-to-electromagnetic relations tied to the speed of light in vacuum (c ≈ 2.99792458 × 10¹⁰ cm/s). Exactly 1 Volt second translates to 1 × 10⁸ Maxwell (1 Mx = 1 × 10⁻⁸ V·s).

Direct Factor1 V·s = 1 × 10⁸ Mx

Inverse Ratio1 Mx = 1 × 10⁻⁸ V·s

Conversion ScaleSI to CGS Gaussian / ESU / EMU Bridge

First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (weber (Wb)) without arbitrary rounding:

V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)

Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)

1. Source SI Bridge (k_source):1 V·s = 1 weber (Wb)

2. Target SI Bridge (k_target):1 Mx = 1 × 10⁻⁸ weber (Wb)

Step-by-step substitution for Volt second → Maxwell:V(Mx) = V(V·s) × ( 1 / 1 × 10⁻⁸ ) = V(V·s) × 1 × 10⁸

Mathematical FormulaValue in Maxwell = Value in Volt second × 1 × 10⁸Direct computational formula applied for standard conversion.

Worked Example

Evaluating an input of 24 Volt second (V·s) produces 2.4 × 10⁹ Maxwell (Mx). In heavy-duty utility and industrial workloads, 480 V·s equals 4.8 × 10¹⁰ Mx.

Inverse check: 1 Mx = 1 × 10⁻⁸ V·s.

Understanding Volt second and Maxwell

Domain Metrology & Engineering Applications

Governing Law & Equation

Faraday's Law of Magnetic Induction (Φ = ∬ B · dA)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using electronic integrating fluxmeters, search coil Helmholtz pairs, and vibrating sample magnetometers (VSM).

Primary Industry Sectors

Applied across transformer core saturation testing, permanent magnet production quality control, magnetic recording heads, and particle accelerator dipoles under international metrology standard ISO 80000-6:2022.

Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 80000-6:2022 and the BIPM SI Brochure (9th Edition). Governed by Faraday's Law of Magnetic Induction (Φ = ∬ B · dA) under ISO 80000 dimensional vector [M L² T⁻² I⁻¹].

Multi-Variable Engineering Bridge Core Flux Distribution & Saturation Margin

Total Magnetic Flux to Flux Density Bridge (Tesla • Gauss • Millitesla • Microtesla • Webers)

Calculate core magnetic flux density B = Φ / A from total flux across core cross-sections, bridging magnetic flux [M L² T⁻² I⁻¹] and flux density [M T⁻² I⁻¹] via core area (A).

Input Total Magnetic Flux (Φ): V·s

Select Core Cross-Section Area: 0.01 m²

Governing Law: B = Φ / A

Vector: [Wb] ÷ [m²] → [T]

Live Calculated Bridge Equivalent:

1 V·s at Distribution Transformer Limb (0.01 m²) = 100 T

Equals 1000000 G • 100000 mT • 1 × 10⁸ μT

SI Induction

100

Tesla

CGS Standard

1000000

Gauss

Hall Sensor Scale

100000

Millitesla

Geomagnetic Unit

1 × 10⁸

μT

Microtesla

Total Flux (0.01m²)

Webers (0.01 m² Core)

CGS Flux (0.01m²)

1 × 10⁸

Maxwells (0.01 m² Core)

Step-by-Step Numerical Derivation Proof View Derivation

1. Normalize Input to SI Base Unit (Wb):
Φ = 1 V·s × 1 = 1 Wb
2. Apply Engineering Parameter (A):
Selected condition: Distribution Transformer Limb (0.01 m²) at A = 0.01 m²
3. Execute Governing Physical Law in SI Units:
B = Φ / A = (1 Wb) ÷ (0.01 m²) = 100 T
4. Convert to Standard Engineering Units:
• T: 100 × 1 = 100 T (Tesla) • G: 100 × 10000 = 1000000 G (Gauss) • mT: 100 × 1000 = 100000 mT (Millitesla) • μT: 100 × 1000000 = 1 × 10⁸ μT (Microtesla) • Wb: 100 × 0.01 = 1 Wb (Webers (0.01 m² Core)) • Mx: 100 × 1000000 = 1 × 10⁸ Mx (Maxwells (0.01 m² Core))

Explore Magnetic Flux Density Converter →

Engineering Substance / Operating Standard	Parameter Value (m²)	Reference State / Condition	Typical Industrial & Engineering Application
SMD Inductor Core (10 mm²)	`1 × 10⁻⁵`	1.0 × 10⁻⁵ m² (10 mm²)	Micro ferrite power inductor core
ETD49 Ferrite Transformer Core (211 mm²)	`0.000211`	2.11 × 10⁻⁴ m² (211 mm²)	Switched-mode power supply transformer
Distribution Transformer Limb (0.01 m²)	`0.01`	0.01 m² (100 cm²)	Pole-mounted distribution transformer limb
Heavy Substation Core Limb (0.08 m²)	`0.08`	0.08 m² (800 cm²)	Grid-scale power transformer core limb

Frequently Asked Questions

There are exactly 1 × 10⁸ maxwells (Mx) in 1 volt second (V·s). To calculate larger amounts manually, simply multiply your total number of volt seconds by the conversion multiplier of 1 × 10⁸.

The mathematical formula to convert volt seconds to maxwells is: [value] * 1 × 10⁸ = maxwells. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from maxwells back to volt seconds, you must divide your starting value by 1 × 10⁸. Our bidirectional tool automatically computes this inverse equation the moment you type into the maxwell input field.

1 Volt second is larger than 1 Maxwell. Specifically, 1 Volt second equals exactly 1 × 10⁸ maxwells, making it 1 × 10⁸ times larger (a difference of 8.00 orders of magnitude). Therefore, quantities expressed in maxwells require a larger numerical value to represent the same physical amount.

Under standard international measurement guidelines, 1 Volt second converts to 1 × 10⁸ maxwells. Precise numerical conversion factors ensure consistency across laboratory, engineering, and field data.