Unit Poles to Maxwells Converter (unit pole to Mx)

Rate this converter

Instant calculation with 0ms overhead

Popular Converters

Live Conversion • ISO 80000-6:2022 Certified

1 Unit Pole = 12.56637 Maxwell

1 unit pole = 12.56637 Mx • 1 Mx = 0.0795775 unit pole

Decimals:

Certified Authority Value

12.56637000

From / Input

unit pole

Swap to Maxwell to Unit Pole

To / Result

Quick Values:

Conversion Formula

To convert Unit Pole to Maxwell, multiply by 12.56637

unit pole × 12.56637 = Mx

Calculation: 1 unit pole × 12.56637 = 12.56637 Mx

Common Unit Pole to Maxwell Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Unit Pole (unit pole) and Maxwell (Mx).

Tap any row to calculate

Unit Pole to Maxwell: Primary Direct Table (15 Steps)

Rule: 1 Unit Pole is equal to 12.56637 Mx (Maxwell)

Unit Pole to Maxwell Conversion Reference Table
Conversion & Equivalent Value	Scientific Notation
0.001 unit pole 0.0125664 Mx	1.257 × 10⁻²
0.01 unit pole 0.125664 Mx	1.257 × 10⁻¹
0.1 unit pole 1.256637 Mx	1.257 × 10⁰
0.5 unit pole 6.283185 Mx	6.283 × 10⁰
1 unit pole 12.56637 Mx	1.257 × 10¹
2 unit pole 25.13274 Mx	2.513 × 10¹
5 unit pole 62.83185 Mx	6.283 × 10¹
10 unit pole 125.6637 Mx	1.257 × 10²
20 unit pole 251.3274 Mx	2.513 × 10²
25 unit pole 314.15925 Mx	3.142 × 10²
50 unit pole 628.3185 Mx	6.283 × 10²
100 unit pole 1256.637 Mx	1.257 × 10³
250 unit pole 3141.5925 Mx	3.142 × 10³
500 unit pole 6283.185 Mx	6.283 × 10³
1000 unit pole 12566.37 Mx	1.257 × 10⁴

Maxwell to Unit Pole: Reciprocal Summary

Rule: 1 Maxwell is equal to 0.0795775 unit pole (Unit Pole)

Maxwell to Unit Pole Conversion Reference Table
Reciprocal & Equivalent Value	Scientific Notation
1 Mx 0.0795775 unit pole	7.958 × 10⁻²
5 Mx 0.397887 unit pole	3.979 × 10⁻¹
10 Mx 0.795775 unit pole	7.958 × 10⁻¹
50 Mx 3.978874 unit pole	3.979 × 10⁰
100 Mx 7.957748 unit pole	7.958 × 10⁰

View Complete 15-Row Maxwell to Unit Pole Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Unit Pole (unit pole) and Maxwell (Mx):

Unit Pole References:

Large hydroelectric power plant generator magnetic pole flux 795774.75 unit pole
High-field laboratory research electromagnet core pole flux 79577.48 unit pole
Utility electrical distribution transformer primary winding flux 397887.38 unit pole

Maxwell References:

CGS magnetic flux: Miniature quartz wristwatch stepping motor 5000 Mx
Small ferrite permanent magnet surface magnetic flux 20000 Mx

Tap any benchmark above to automatically calculate its exact equivalent in Maxwell.

ISQ Dimension: [M L² T⁻² I⁻¹] Coherent SI Unit: weber (Wb) Electromagnetism, Circuits & Field Theory

How to Convert Unit Pole to Maxwell

Converting Unit Pole (unit pole) to Maxwell (Mx) is a core calculation in Magnetic Flux, which measures the total magnetic field passing through a given surface area. This calculation bridges modern MKSA metric standards with the historical Gaussian centimetre-gram-second (CGS) electrostatic and electromagnetic framework. In CGS systems, electromagnetic units (such as statvolts, abvolts, dynes, ergs, and gauss) are formulated directly from mechanical dimensions, with electrostatic-to-electromagnetic relations tied to the speed of light in vacuum (c ≈ 2.99792458 × 10¹⁰ cm/s). Exactly 1 Unit Pole translates to 12.56637 Maxwell (1 Mx = 0.0795775 unit pole).

Direct Factor1 unit pole = 12.56637 Mx

Inverse Ratio1 Mx = 0.0795775 unit pole

Conversion ScaleSI to CGS Gaussian / ESU / EMU Bridge

First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (weber (Wb)) without arbitrary rounding:

V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)

Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)

1. Source SI Bridge (k_source):1 unit pole = 1.256637 × 10⁻⁷ weber (Wb)

2. Target SI Bridge (k_target):1 Mx = 1 × 10⁻⁸ weber (Wb)

Step-by-step substitution for Unit Pole → Maxwell:V(Mx) = V(unit pole) × ( 1.256637 × 10⁻⁷ / 1 × 10⁻⁸ ) = V(unit pole) × 12.56637

Mathematical FormulaValue in Maxwell = Value in Unit Pole × 12.56637Direct computational formula applied for standard conversion.

Worked Example

Converting 15 unit pole yields an exact output of 188.49555 Mx in Maxwell. Under higher industrial throughput, 240 unit pole translates to 3015.9288 Mx.

Inverse check: 1 Mx = 0.0795775 unit pole.

Understanding Unit Pole and Maxwell

Domain Metrology & Engineering Applications

Governing Law & Equation

Faraday's Law of Magnetic Induction (Φ = ∬ B · dA)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using electronic integrating fluxmeters, search coil Helmholtz pairs, and vibrating sample magnetometers (VSM).

Primary Industry Sectors

Applied across transformer core saturation testing, permanent magnet production quality control, magnetic recording heads, and particle accelerator dipoles under international metrology standard ISO 80000-6:2022.

Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 80000-6:2022 and the BIPM SI Brochure (9th Edition). Governed by Faraday's Law of Magnetic Induction (Φ = ∬ B · dA) under ISO 80000 dimensional vector [M L² T⁻² I⁻¹].

Multi-Variable Engineering Bridge Core Flux Distribution & Saturation Margin

Total Magnetic Flux to Flux Density Bridge (Tesla • Gauss • Millitesla • Microtesla • Webers)

Calculate core magnetic flux density B = Φ / A from total flux across core cross-sections, bridging magnetic flux [M L² T⁻² I⁻¹] and flux density [M T⁻² I⁻¹] via core area (A).

Input Total Magnetic Flux (Φ): unit pole

Select Core Cross-Section Area: 0.01 m²

Governing Law: B = Φ / A

Vector: [Wb] ÷ [m²] → [T]

Live Calculated Bridge Equivalent:

1 unit pole at Distribution Transformer Limb (0.01 m²) = 1.256637 × 10⁻⁵ T

Equals 0.13 G • 0.01257 mT • 12.57 μT

SI Induction

1.256637 × 10⁻⁵

Tesla

CGS Standard

0.13

Gauss

Hall Sensor Scale

0.01257

Millitesla

Geomagnetic Unit

12.57

μT

Microtesla

Total Flux (0.01m²)

1.256637 × 10⁻⁷

Webers (0.01 m² Core)

CGS Flux (0.01m²)

12.57

Maxwells (0.01 m² Core)

Step-by-Step Numerical Derivation Proof View Derivation

1. Normalize Input to SI Base Unit (Wb):
Φ = 1 unit pole × 1.256637 × 10⁻⁷ = 1.256637 × 10⁻⁷ Wb
2. Apply Engineering Parameter (A):
Selected condition: Distribution Transformer Limb (0.01 m²) at A = 0.01 m²
3. Execute Governing Physical Law in SI Units:
B = Φ / A = (1.256637 × 10⁻⁷ Wb) ÷ (0.01 m²) = 1.256637 × 10⁻⁵ T
4. Convert to Standard Engineering Units:
• T: 1.256637 × 10⁻⁵ × 1 = 1.256637 × 10⁻⁵ T (Tesla) • G: 1.256637 × 10⁻⁵ × 10000 = 0.13 G (Gauss) • mT: 1.256637 × 10⁻⁵ × 1000 = 0.01257 mT (Millitesla) • μT: 1.256637 × 10⁻⁵ × 1000000 = 12.57 μT (Microtesla) • Wb: 1.256637 × 10⁻⁵ × 0.01 = 1.256637 × 10⁻⁷ Wb (Webers (0.01 m² Core)) • Mx: 1.256637 × 10⁻⁵ × 1000000 = 12.57 Mx (Maxwells (0.01 m² Core))

Explore Magnetic Flux Density Converter →

Engineering Substance / Operating Standard	Parameter Value (m²)	Reference State / Condition	Typical Industrial & Engineering Application
SMD Inductor Core (10 mm²)	`1 × 10⁻⁵`	1.0 × 10⁻⁵ m² (10 mm²)	Micro ferrite power inductor core
ETD49 Ferrite Transformer Core (211 mm²)	`0.000211`	2.11 × 10⁻⁴ m² (211 mm²)	Switched-mode power supply transformer
Distribution Transformer Limb (0.01 m²)	`0.01`	0.01 m² (100 cm²)	Pole-mounted distribution transformer limb
Heavy Substation Core Limb (0.08 m²)	`0.08`	0.08 m² (800 cm²)	Grid-scale power transformer core limb

Frequently Asked Questions

There are exactly 12.56637 maxwells (Mx) in 1 unit pole (unit pole). To calculate larger amounts manually, simply multiply your total number of unit poles by the conversion multiplier of 12.56637.

The mathematical formula to convert unit poles to maxwells is: [value] * 12.56637 = maxwells. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from maxwells back to unit poles, you must divide your starting value by 12.56637. Our bidirectional tool automatically computes this inverse equation the moment you type into the maxwell input field.

1 Unit Pole is larger than 1 Maxwell. Specifically, 1 Unit Pole equals exactly 12.56637 maxwells, making it 12.5664 times larger (a difference of 1.10 orders of magnitude). Therefore, quantities expressed in maxwells require a larger numerical value to represent the same physical amount.

Under standard international measurement guidelines, 1 Unit Pole converts to 12.56637 maxwells. Precise numerical conversion factors ensure consistency across laboratory, engineering, and field data.