Volt seconds to Gauss square centimeters Converter (V·s to G·cm²)

Rate this converter

Instant calculation with 0ms overhead

Popular Converters

Live Conversion • ISO 80000-6:2022 Certified

1 Volt second = 1 × 10⁸ Gauss square centimeter

1 V·s = 1 × 10⁸ G·cm² • 1 G·cm² = 1 × 10⁻⁸ V·s

Decimals:

Certified Authority Value

100000000.00000000

G·cm²

From / Input

V·s

Swap to Gauss square centimeter to Volt second

To / Result

G·cm²

Quick Values:

Conversion Formula

To convert Volt second to Gauss square centimeter, multiply by 1 × 10⁸

V·s × 1 × 10⁸ = G·cm²

Calculation: 1 V·s × 1 × 10⁸ = 1 × 10⁸ G·cm²

Common Volt second to Gauss square centimeter Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Volt second (V·s) and Gauss square centimeter (G·cm²).

Tap any row to calculate

Volt second to Gauss square centimeter: Primary Direct Table (15 Steps)

Rule: 1 Volt second is equal to 1 × 10⁸ G·cm² (Gauss square centimeter)

Volt second to Gauss square centimeter Conversion Reference Table
Conversion & Equivalent Value	Scientific Notation
0.001 V·s 100000 G·cm²	1 × 10⁵
0.01 V·s 1000000 G·cm²	1 × 10⁶
0.1 V·s 1 × 10⁷ G·cm²	1 × 10⁷
0.5 V·s 5 × 10⁷ G·cm²	5 × 10⁷
1 V·s 1 × 10⁸ G·cm²	1 × 10⁸
2 V·s 2 × 10⁸ G·cm²	2 × 10⁸
5 V·s 5 × 10⁸ G·cm²	5 × 10⁸
10 V·s 1 × 10⁹ G·cm²	1 × 10⁹
20 V·s 2 × 10⁹ G·cm²	2 × 10⁹
25 V·s 2.5 × 10⁹ G·cm²	2.5 × 10⁹
50 V·s 5 × 10⁹ G·cm²	5 × 10⁹
100 V·s 1 × 10¹⁰ G·cm²	1 × 10¹⁰
250 V·s 2.5 × 10¹⁰ G·cm²	2.5 × 10¹⁰
500 V·s 5 × 10¹⁰ G·cm²	5 × 10¹⁰
1000 V·s 1 × 10¹¹ G·cm²	1 × 10¹¹

Gauss square centimeter to Volt second: Reciprocal Summary

Rule: 1 Gauss square centimeter is equal to 1 × 10⁻⁸ V·s (Volt second)

Gauss square centimeter to Volt second Conversion Reference Table
Reciprocal & Equivalent Value	Scientific Notation
1 G·cm² 1 × 10⁻⁸ V·s	1 × 10⁻⁸
5 G·cm² 5 × 10⁻⁸ V·s	5 × 10⁻⁸
10 G·cm² 1 × 10⁻⁷ V·s	1 × 10⁻⁷
50 G·cm² 5 × 10⁻⁷ V·s	5 × 10⁻⁷
100 G·cm² 1 × 10⁻⁶ V·s	1 × 10⁻⁶

View Complete 15-Row Gauss square centimeter to Volt second Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Volt second (V·s) and Gauss square centimeter (G·cm²):

Volt second References:

Equivalent to weber: High-frequency ferrite flyback transformer 0.005 V·s

Gauss square centimeter References:

CGS electromagnetic flux unit: Small electronic relay core flux 10000 G·cm²

Tap any benchmark above to automatically calculate its exact equivalent in Gauss square centimeter.

ISQ Dimension: [M L² T⁻² I⁻¹] Coherent SI Unit: weber (Wb) Electromagnetism, Circuits & Field Theory

How to Convert Volt second to Gauss square centimeter

Converting Volt second (V·s) to Gauss square centimeter (G·cm²) is a core calculation in Magnetic Flux, which measures the total magnetic field passing through a given surface area. This calculation bridges modern MKSA metric standards with the historical Gaussian centimetre-gram-second (CGS) electrostatic and electromagnetic framework. In CGS systems, electromagnetic units (such as statvolts, abvolts, dynes, ergs, and gauss) are formulated directly from mechanical dimensions, with electrostatic-to-electromagnetic relations tied to the speed of light in vacuum (c ≈ 2.99792458 × 10¹⁰ cm/s). Exactly 1 Volt second translates to 1 × 10⁸ Gauss square centimeter (1 G·cm² = 1 × 10⁻⁸ V·s).

Direct Factor1 V·s = 1 × 10⁸ G·cm²

Inverse Ratio1 G·cm² = 1 × 10⁻⁸ V·s

Conversion ScaleSI to CGS Gaussian / ESU / EMU Bridge

First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (weber (Wb)) without arbitrary rounding:

V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)

Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)

1. Source SI Bridge (k_source):1 V·s = 1 weber (Wb)

2. Target SI Bridge (k_target):1 G·cm² = 1 × 10⁻⁸ weber (Wb)

Step-by-step substitution for Volt second → Gauss square centimeter:V(G·cm²) = V(V·s) × ( 1 / 1 × 10⁻⁸ ) = V(V·s) × 1 × 10⁸

Mathematical FormulaValue in Gauss square centimeter = Value in Volt second × 1 × 10⁸Direct computational formula applied for standard conversion.

Worked Example

To convert 12 Volt second (V·s) to Gauss square centimeter (G·cm²): multiply 12 by 1 × 10⁸ to get 1.2 × 10⁹ G·cm². At an industrial engineering scale, 2500 V·s converts to 2.5 × 10¹¹ G·cm².

Inverse check: 1 G·cm² = 1 × 10⁻⁸ V·s.

Understanding Volt second and Gauss square centimeter

Domain Metrology & Engineering Applications

Governing Law & Equation

Faraday's Law of Magnetic Induction (Φ = ∬ B · dA)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using electronic integrating fluxmeters, search coil Helmholtz pairs, and vibrating sample magnetometers (VSM).

Primary Industry Sectors

Applied across transformer core saturation testing, permanent magnet production quality control, magnetic recording heads, and particle accelerator dipoles under international metrology standard ISO 80000-6:2022.

Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 80000-6:2022 and the BIPM SI Brochure (9th Edition). Governed by Faraday's Law of Magnetic Induction (Φ = ∬ B · dA) under ISO 80000 dimensional vector [M L² T⁻² I⁻¹].

Multi-Variable Engineering Bridge Core Flux Distribution & Saturation Margin

Total Magnetic Flux to Flux Density Bridge (Tesla • Gauss • Millitesla • Microtesla • Webers)

Calculate core magnetic flux density B = Φ / A from total flux across core cross-sections, bridging magnetic flux [M L² T⁻² I⁻¹] and flux density [M T⁻² I⁻¹] via core area (A).

Input Total Magnetic Flux (Φ): V·s

Select Core Cross-Section Area: 0.01 m²

Governing Law: B = Φ / A

Vector: [Wb] ÷ [m²] → [T]

Live Calculated Bridge Equivalent:

1 V·s at Distribution Transformer Limb (0.01 m²) = 100 T

Equals 1000000 G • 100000 mT • 1 × 10⁸ μT

SI Induction

100

Tesla

CGS Standard

1000000

Gauss

Hall Sensor Scale

100000

Millitesla

Geomagnetic Unit

1 × 10⁸

μT

Microtesla

Total Flux (0.01m²)

Webers (0.01 m² Core)

CGS Flux (0.01m²)

1 × 10⁸

Maxwells (0.01 m² Core)

Step-by-Step Numerical Derivation Proof View Derivation

1. Normalize Input to SI Base Unit (Wb):
Φ = 1 V·s × 1 = 1 Wb
2. Apply Engineering Parameter (A):
Selected condition: Distribution Transformer Limb (0.01 m²) at A = 0.01 m²
3. Execute Governing Physical Law in SI Units:
B = Φ / A = (1 Wb) ÷ (0.01 m²) = 100 T
4. Convert to Standard Engineering Units:
• T: 100 × 1 = 100 T (Tesla) • G: 100 × 10000 = 1000000 G (Gauss) • mT: 100 × 1000 = 100000 mT (Millitesla) • μT: 100 × 1000000 = 1 × 10⁸ μT (Microtesla) • Wb: 100 × 0.01 = 1 Wb (Webers (0.01 m² Core)) • Mx: 100 × 1000000 = 1 × 10⁸ Mx (Maxwells (0.01 m² Core))

Explore Magnetic Flux Density Converter →

Engineering Substance / Operating Standard	Parameter Value (m²)	Reference State / Condition	Typical Industrial & Engineering Application
SMD Inductor Core (10 mm²)	`1 × 10⁻⁵`	1.0 × 10⁻⁵ m² (10 mm²)	Micro ferrite power inductor core
ETD49 Ferrite Transformer Core (211 mm²)	`0.000211`	2.11 × 10⁻⁴ m² (211 mm²)	Switched-mode power supply transformer
Distribution Transformer Limb (0.01 m²)	`0.01`	0.01 m² (100 cm²)	Pole-mounted distribution transformer limb
Heavy Substation Core Limb (0.08 m²)	`0.08`	0.08 m² (800 cm²)	Grid-scale power transformer core limb

Frequently Asked Questions

There are exactly 1 × 10⁸ gauss square centimeters (G·cm²) in 1 volt second (V·s). To calculate larger amounts manually, simply multiply your total number of volt seconds by the conversion multiplier of 1 × 10⁸.

The mathematical formula to convert volt seconds to gauss square centimeters is: [value] * 1 × 10⁸ = gauss square centimeters. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from gauss square centimeters back to volt seconds, you must divide your starting value by 1 × 10⁸. Our bidirectional tool automatically computes this inverse equation the moment you type into the gauss square centimeter input field.

1 Volt second is larger than 1 Gauss square centimeter. Specifically, 1 Volt second equals exactly 1 × 10⁸ gauss square centimeters, making it 1 × 10⁸ times larger (a difference of 8.00 orders of magnitude). Therefore, quantities expressed in gauss square centimeters require a larger numerical value to represent the same physical amount.

Under standard international measurement guidelines, 1 Volt second converts to 1 × 10⁸ gauss square centimeters. Precise numerical conversion factors ensure consistency across laboratory, engineering, and field data.