Gauss square centimeters to Volt seconds Converter (G·cm² to V·s)

Rate this converter

Instant calculation with 0ms overhead

Popular Converters

Live Conversion • ISO 80000-6:2022 Certified

1 Gauss square centimeter = 1 × 10⁻⁸ Volt second

1 G·cm² = 1 × 10⁻⁸ V·s • 1 V·s = 1 × 10⁸ G·cm²

Decimals:

Certified Authority Value

0.00000001

V·s

From / Input

G·cm²

Swap to Volt second to Gauss square centimeter

To / Result

V·s

Quick Values:

Conversion Formula

To convert Gauss square centimeter to Volt second, multiply by 1 × 10⁻⁸

G·cm² × 1 × 10⁻⁸ = V·s

Calculation: 1 G·cm² × 1 × 10⁻⁸ = 1 × 10⁻⁸ V·s

Common Gauss square centimeter to Volt second Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Gauss square centimeter (G·cm²) and Volt second (V·s).

Tap any row to calculate

Gauss square centimeter to Volt second: Primary Direct Table (15 Steps)

Rule: 1 Gauss square centimeter is equal to 1 × 10⁻⁸ V·s (Volt second)

Gauss square centimeter to Volt second Conversion Reference Table
Conversion & Equivalent Value	Scientific Notation
0.001 G·cm² 1 × 10⁻¹¹ V·s	1 × 10⁻¹¹
0.01 G·cm² 1 × 10⁻¹⁰ V·s	1 × 10⁻¹⁰
0.1 G·cm² 1 × 10⁻⁹ V·s	1 × 10⁻⁹
0.5 G·cm² 5 × 10⁻⁹ V·s	5 × 10⁻⁹
1 G·cm² 1 × 10⁻⁸ V·s	1 × 10⁻⁸
2 G·cm² 2 × 10⁻⁸ V·s	2 × 10⁻⁸
5 G·cm² 5 × 10⁻⁸ V·s	5 × 10⁻⁸
10 G·cm² 1 × 10⁻⁷ V·s	1 × 10⁻⁷
20 G·cm² 2 × 10⁻⁷ V·s	2 × 10⁻⁷
25 G·cm² 2.5 × 10⁻⁷ V·s	2.5 × 10⁻⁷
50 G·cm² 5 × 10⁻⁷ V·s	5 × 10⁻⁷
100 G·cm² 1 × 10⁻⁶ V·s	1 × 10⁻⁶
250 G·cm² 2.5 × 10⁻⁶ V·s	2.5 × 10⁻⁶
500 G·cm² 5 × 10⁻⁶ V·s	5 × 10⁻⁶
1000 G·cm² 1 × 10⁻⁵ V·s	1 × 10⁻⁵

Volt second to Gauss square centimeter: Reciprocal Summary

Rule: 1 Volt second is equal to 1 × 10⁸ G·cm² (Gauss square centimeter)

Volt second to Gauss square centimeter Conversion Reference Table
Reciprocal & Equivalent Value	Scientific Notation
1 V·s 1 × 10⁸ G·cm²	1 × 10⁸
5 V·s 5 × 10⁸ G·cm²	5 × 10⁸
10 V·s 1 × 10⁹ G·cm²	1 × 10⁹
50 V·s 5 × 10⁹ G·cm²	5 × 10⁹
100 V·s 1 × 10¹⁰ G·cm²	1 × 10¹⁰

View Complete 15-Row Volt second to Gauss square centimeter Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Gauss square centimeter (G·cm²) and Volt second (V·s):

Gauss square centimeter References:

CGS electromagnetic flux unit: Small electronic relay core flux 10000 G·cm²

Volt second References:

Equivalent to weber: High-frequency ferrite flyback transformer 0.005 V·s

Tap any benchmark above to automatically calculate its exact equivalent in Volt second.

ISQ Dimension: [M L² T⁻² I⁻¹] Coherent SI Unit: weber (Wb) Electromagnetism, Circuits & Field Theory

How to Convert Gauss square centimeter to Volt second

Converting Gauss square centimeter (G·cm²) to Volt second (V·s) is a core calculation in Magnetic Flux, which measures the total magnetic field passing through a given surface area. This calculation bridges modern MKSA metric standards with the historical Gaussian centimetre-gram-second (CGS) electrostatic and electromagnetic framework. In CGS systems, electromagnetic units (such as statvolts, abvolts, dynes, ergs, and gauss) are formulated directly from mechanical dimensions, with electrostatic-to-electromagnetic relations tied to the speed of light in vacuum (c ≈ 2.99792458 × 10¹⁰ cm/s). Exactly 1 Gauss square centimeter translates to 1 × 10⁻⁸ Volt second (1 V·s = 1 × 10⁸ G·cm²).

Direct Factor1 G·cm² = 1 × 10⁻⁸ V·s

Inverse Ratio1 V·s = 1 × 10⁸ G·cm²

Conversion ScaleSI to CGS Gaussian / ESU / EMU Bridge

First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (weber (Wb)) without arbitrary rounding:

V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)

Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)

1. Source SI Bridge (k_source):1 G·cm² = 1 × 10⁻⁸ weber (Wb)

2. Target SI Bridge (k_target):1 V·s = 1 weber (Wb)

Step-by-step substitution for Gauss square centimeter → Volt second:V(V·s) = V(G·cm²) × ( 1 × 10⁻⁸ / 1 ) = V(G·cm²) × 1 × 10⁻⁸

Mathematical FormulaValue in Volt second = Value in Gauss square centimeter × 1 × 10⁻⁸Direct computational formula applied for standard conversion.

Worked Example

Evaluating an input of 120 Gauss square centimeter (G·cm²) produces 1.2 × 10⁻⁶ Volt second (V·s). In heavy-duty utility and industrial workloads, 5000 G·cm² equals 5 × 10⁻⁵ V·s.

Inverse check: 1 V·s = 1 × 10⁸ G·cm².

Understanding Gauss square centimeter and Volt second

Domain Metrology & Engineering Applications

Governing Law & Equation

Faraday's Law of Magnetic Induction (Φ = ∬ B · dA)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using electronic integrating fluxmeters, search coil Helmholtz pairs, and vibrating sample magnetometers (VSM).

Primary Industry Sectors

Applied across transformer core saturation testing, permanent magnet production quality control, magnetic recording heads, and particle accelerator dipoles under international metrology standard ISO 80000-6:2022.

Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 80000-6:2022 and the BIPM SI Brochure (9th Edition). Governed by Faraday's Law of Magnetic Induction (Φ = ∬ B · dA) under ISO 80000 dimensional vector [M L² T⁻² I⁻¹].

Multi-Variable Engineering Bridge Core Flux Distribution & Saturation Margin

Total Magnetic Flux to Flux Density Bridge (Tesla • Gauss • Millitesla • Microtesla • Webers)

Calculate core magnetic flux density B = Φ / A from total flux across core cross-sections, bridging magnetic flux [M L² T⁻² I⁻¹] and flux density [M T⁻² I⁻¹] via core area (A).

Input Total Magnetic Flux (Φ): G·cm²

Select Core Cross-Section Area: 0.01 m²

Governing Law: B = Φ / A

Vector: [Wb] ÷ [m²] → [T]

Live Calculated Bridge Equivalent:

1 G·cm² at Distribution Transformer Limb (0.01 m²) = 1 × 10⁻⁶ T

Equals 0.01 G • 0.001 mT • 1 μT

SI Induction

1 × 10⁻⁶

Tesla

CGS Standard

0.01

Gauss

Hall Sensor Scale

0.001

Millitesla

Geomagnetic Unit

μT

Microtesla

Total Flux (0.01m²)

1 × 10⁻⁸

Webers (0.01 m² Core)

CGS Flux (0.01m²)

Maxwells (0.01 m² Core)

Step-by-Step Numerical Derivation Proof View Derivation

1. Normalize Input to SI Base Unit (Wb):
Φ = 1 G·cm² × 1 × 10⁻⁸ = 1 × 10⁻⁸ Wb
2. Apply Engineering Parameter (A):
Selected condition: Distribution Transformer Limb (0.01 m²) at A = 0.01 m²
3. Execute Governing Physical Law in SI Units:
B = Φ / A = (1 × 10⁻⁸ Wb) ÷ (0.01 m²) = 1 × 10⁻⁶ T
4. Convert to Standard Engineering Units:
• T: 1 × 10⁻⁶ × 1 = 1 × 10⁻⁶ T (Tesla) • G: 1 × 10⁻⁶ × 10000 = 0.01 G (Gauss) • mT: 1 × 10⁻⁶ × 1000 = 0.001 mT (Millitesla) • μT: 1 × 10⁻⁶ × 1000000 = 1 μT (Microtesla) • Wb: 1 × 10⁻⁶ × 0.01 = 1 × 10⁻⁸ Wb (Webers (0.01 m² Core)) • Mx: 1 × 10⁻⁶ × 1000000 = 1 Mx (Maxwells (0.01 m² Core))

Explore Magnetic Flux Density Converter →

Engineering Substance / Operating Standard	Parameter Value (m²)	Reference State / Condition	Typical Industrial & Engineering Application
SMD Inductor Core (10 mm²)	`1 × 10⁻⁵`	1.0 × 10⁻⁵ m² (10 mm²)	Micro ferrite power inductor core
ETD49 Ferrite Transformer Core (211 mm²)	`0.000211`	2.11 × 10⁻⁴ m² (211 mm²)	Switched-mode power supply transformer
Distribution Transformer Limb (0.01 m²)	`0.01`	0.01 m² (100 cm²)	Pole-mounted distribution transformer limb
Heavy Substation Core Limb (0.08 m²)	`0.08`	0.08 m² (800 cm²)	Grid-scale power transformer core limb

Frequently Asked Questions

There are exactly 1 × 10⁻⁸ volt seconds (V·s) in 1 gauss square centimeter (G·cm²). To calculate larger amounts manually, simply multiply your total number of gauss square centimeters by the conversion multiplier of 1 × 10⁻⁸.

The mathematical formula to convert gauss square centimeters to volt seconds is: [value] * 1 × 10⁻⁸ = volt seconds. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from volt seconds back to gauss square centimeters, you must divide your starting value by 1 × 10⁻⁸. Our bidirectional tool automatically computes this inverse equation the moment you type into the volt second input field.

1 Volt second is larger than 1 Gauss square centimeter. Specifically, 1 Gauss square centimeter equals 1 × 10⁻⁸ volt seconds, meaning 1 Volt second is 1 × 10⁸ times larger than 1 Gauss square centimeter (a difference of 8.00 orders of magnitude). Expressing measurements in gauss square centimeters requires a larger numerical value to represent the equivalent physical magnitude.

Under standard international measurement guidelines, 1 Gauss square centimeter converts to 1 × 10⁻⁸ volt seconds. Precise numerical conversion factors ensure consistency across laboratory, engineering, and field data.