Skip to main content
0 results ↑ ↓ navigate, ↵ select

Moles/second to Moles/minute Converter (mol/s to mol/min)

Rate this converter 0 of 0 ratings
Instant calculation with 0ms overhead
Popular Converters
Live Conversion • ISO 80000-9:2019 Certified
1 Mole/second = 60 Mole/minute
1 mol/s = 60 mol/min • 1 mol/min = 0.0166667 mol/s
Mole/second to Mole/minute: One Mole/second is equal to 60 Moles/minute.
Certified Authority Value
60.00000000
mol/min
Exact: 1 mol/min ≡ 0.01666666667 mol/s
mol/s
mol/s
Swap to Mole/minute to Mole/second
Swap to Mole/minute to Mole/second
mol/min
mol/min 60
Quick Values:
Conversion Formula
To convert Mole/second to Mole/minute, multiply by 60
mol/s × 60 = mol/min

Calculation: 1 mol/s × 60 = 60 mol/min

Common Mole/second to Mole/minute Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Mole/second (mol/s) and Mole/minute (mol/min).

Tap any row to calculate
Mole/second to Mole/minute: Primary Direct Table (15 Steps)
Mole/second to Mole/minute Conversion Reference Table
Conversion & Equivalent Value Scientific Notation
0.001 mol/s 0.06 mol/min 6 × 10⁻²
0.01 mol/s 0.6 mol/min 6 × 10⁻¹
0.1 mol/s 6 mol/min 6 × 10⁰
0.5 mol/s 30 mol/min 3 × 10¹
1 mol/s 60 mol/min 6 × 10¹
2 mol/s 120 mol/min 1.2 × 10²
5 mol/s 300 mol/min 3 × 10²
10 mol/s 600 mol/min 6 × 10²
20 mol/s 1200 mol/min 1.2 × 10³
25 mol/s 1500 mol/min 1.5 × 10³
50 mol/s 3000 mol/min 3 × 10³
100 mol/s 6000 mol/min 6 × 10³
250 mol/s 15000 mol/min 1.5 × 10⁴
500 mol/s 30000 mol/min 3 × 10⁴
1000 mol/s 60000 mol/min 6 × 10⁴
Mole/minute to Mole/second: Reciprocal Summary
Mole/minute to Mole/second Conversion Reference Table
Reciprocal & Equivalent Value Scientific Notation
1 mol/min 0.0166667 mol/s 1.667 × 10⁻²
5 mol/min 0.0833333 mol/s 8.333 × 10⁻²
10 mol/min 0.166667 mol/s 1.667 × 10⁻¹
50 mol/min 0.833333 mol/s 8.333 × 10⁻¹
100 mol/min 1.666667 mol/s 1.667 × 10⁰
View Complete 15-Row Mole/minute to Mole/second Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Mole/second (mol/s) and Mole/minute (mol/min):

Mole/second References:

  • Industrial Haber-Bosch ammonia synthesis reactor gas feed rate 1000 mol/s
  • Passenger automobile catalytic converter exhaust gas molar flow 10 mol/s
  • Commercial PEM fuel cell hydrogen consumption at full power 0.5 mol/s

Mole/minute References:

  • Laboratory chemical distillation reflux vapor condensation rate 2 mol/min
  • Industrial flue gas scrubber CO2 chemical absorption rate 50 mol/min

Tap any benchmark above to automatically calculate its exact equivalent in Mole/minute.

ISQ Dimension: [N T⁻¹] Coherent SI Unit: mole per second (mol/s) Fluid Dynamics & Rheology

How to Convert Mole/second to Mole/minute

Converting Mole/second (mol/s) to Mole/minute (mol/min) is a core calculation in Molar Flow Rate, which measures the chemical amount of substance (in moles) flowing through a boundary per unit of time. Because Mole/second represents a larger magnitude than Mole/minute, converting from mol/s to mol/min expands the numerical figure. Exactly 1 Mole/second encompasses 60 Mole/minute. To convert any quantity, multiply the value in Mole/second by 60.

Direct Factor1 mol/s = 60 mol/min
Inverse Ratio1 mol/min = 0.0166667 mol/s
Conversion ScaleDirect Proportional Magnitude Expansion
First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (mole per second (mol/s)) without arbitrary rounding:

Vtarget=Vsource×(ksource→SIktarget→SI)V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)
Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)
1. Source SI Bridge (ksource):1 mol/s = 1 mole per second (mol/s)
2. Target SI Bridge (ktarget):1 mol/min = 0.0166667 mole per second (mol/s)
Step-by-step substitution for Mole/second → Mole/minute:V(mol/min) = V(mol/s) × ( 1 / 0.0166667 ) = V(mol/s) × 60
Mathematical FormulaValue in Mole/minute = Value in Mole/second × 60Direct computational formula applied for standard conversion.
Worked Example

To convert 120 Mole/second (mol/s) to Mole/minute (mol/min): multiply 120 by 60 to get 7200 mol/min. At an industrial engineering scale, 480 mol/s converts to 28800 mol/min.

Inverse check: 1 mol/min = 0.0166667 mol/s.

Understanding Mole/second and Mole/minute

Mole/second

mol/s
SI Base Standard

A Mole/second (mol/s) is the official base standard unit for molar flow rate.

Applications & Practical Context

In practical flow molar terms, a industrial Haber-Bosch ammonia synthesis reactor gas feed rate equals 1000 mol/s, a passenger automobile catalytic converter exhaust gas molar flow equals 10 mol/s, a commercial PEM fuel cell hydrogen consumption at full power equals 0.5 mol/s.

Physical Setup

A molar flow rate of 1 mol/s corresponds to 1 Mole/second of molecular substance transported per unit time.

Conversion to SI Unit: mole per second (mol/s)
1 mol/s = 1 mol/s (Base Standard)

Mole/minute

mol/min
Standard Unit

A Mole/minute (mol/min) is a recognized unit for molar flow rate.

Applications & Practical Context

In practical flow molar terms, a laboratory chemical distillation reflux vapor condensation rate equals 2 mol/min, a industrial flue gas scrubber CO2 chemical absorption rate equals 50 mol/min.

Physical Setup

A physical magnitude of 1 mol/min corresponds to 0.0166667 mol/s in standard SI measurement.

Conversion to SI Unit: mole per second (mol/s)
1 mol/min = 0.0166667 mol/s

Domain Metrology & Engineering Applications

Governing Law & Equation

Stoichiometric Reaction Feed Dynamics (ṅ = dn/dt)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using thermal mass flow controllers (MFC) calibrated via gas chromatography, and Raman spectroscopy inline flow sensors.

Primary Industry Sectors

Applied across semiconductor chemical vapor deposition (CVD), petrochemical cracking reactor feed control, pharmaceutical synthesis, and industrial fermentation under international metrology standard ISO 80000-9:2019.

Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 80000-9:2019 and the BIPM SI Brochure (9th Edition). Governed by Stoichiometric Reaction Feed Dynamics (ṅ = dn/dt) under ISO 80000 dimensional vector [N T⁻¹].

Multi-Variable Engineering Bridge Stoichiometric Flow & Chemical Engineering

Molar Flow to Physical Mass Flow Bridge (kg/s • kg/h • lb/h • t/h)

Translate chemical molar flow (ṅ) into physical stream mass flow (ṁ) across industrial gases and reagents via molecular weight ṁ = ṅ × Mw, bridging molar throughput [N T⁻¹] and mass flow [M T⁻¹].

ṁ = ṅ × Mw
Vector: [mol/s] × [g/mol] × 10⁻³ → [kg/s]
Live Calculated Bridge Equivalent:
1 mol/s at Methane / Natural Gas CH₄ (16.04 g/mol) = 0.01604 kg/s
Equals 57.744 kg/h • 0.03536 lb/s • 127.3 lb/h
SI Mass Flow
0.01604
kg/s
Kilograms per Second
Industrial Process
57.744
kg/h
Kilograms per Hour
US Mass Flow
0.03536
lb/s
Pounds per Second
Boiler / Turbine Rating
127.3
lb/h
Pounds per Hour
Heavy Plant Header
0.05774
t/h
Metric Tons per Hour
Chemical / Laboratory
16.04
g/s
Grams per Second
  1. 1. Normalize Input to SI Base Unit (mol/s):
    ṅ = 1 mol/s × 1 = 1 mol/s
  2. 2. Apply Engineering Parameter (Mw):
    Selected condition: Methane / Natural Gas CH₄ (16.04 g/mol) at Mw = 16.04 g/mol
  3. 3. Execute Governing Physical Law in SI Units:
    ṁ = ṅ × Mw = (0.001 kg/g) × (16.04 g/mol) × (1 mol/s) = 0.01604 kg/s
  4. 4. Convert to Standard Engineering Units:
    • kg/s: 0.01604 × 1 = 0.01604 kg/s (Kilograms per Second) • kg/h: 0.01604 × 3600 = 57.744 kg/h (Kilograms per Hour) • lb/s: 0.01604 × 2.2046 = 0.03536 lb/s (Pounds per Second) • lb/h: 0.01604 × 7936.6414 = 127.3 lb/h (Pounds per Hour) • t/h: 0.01604 × 3.6 = 0.05774 t/h (Metric Tons per Hour) • g/s: 0.01604 × 1000 = 16.04 g/s (Grams per Second)
Explore Full Mass Flow Converter →
Engineering Substance / Operating Standard Parameter Value (g/mol) Reference State / Condition Typical Industrial & Engineering Application
Hydrogen Gas H₂ (2.016 g/mol) 2.016 Mw = 2.016 g/mol Fuel cell feeds & refinery hydrotreating
Methane / Natural Gas CH₄ (16.04 g/mol) 16.04 Mw = 16.04 g/mol Turbine fuel & syngas reforming
Steam / Water Vapor H₂O (18.02 g/mol) 18.02 Mw = 18.02 g/mol Thermal power & industrial boiler steam
Nitrogen N₂ (28.01 g/mol) 28.01 Mw = 28.01 g/mol Inert purging & cryogenic plant feed
Oxygen O₂ (32.00 g/mol) 32 Mw = 32.00 g/mol Oxy-fuel combustion & medical oxygen
Carbon Dioxide CO₂ (44.01 g/mol) 44.01 Mw = 44.01 g/mol Carbon capture & beverage carbonation
Embed
Need this Mole/second to Mole/minute calculator on your website, lab portal, or research blog?
Free HTML Widget 100% Responsive Zero Cookie Tracking
Notice a calculation discrepancy, rounding error, or glitch?
Help us maintain 100% scientific precision and report any issues directly to engineering.

Frequently Asked Questions

There are exactly 60 moles/minute (mol/min) in 1 mole/second (mol/s). To calculate larger amounts manually, simply multiply your total number of moles/second by the conversion multiplier of 60.

The mathematical formula to convert moles/second to moles/minute is: [value] * 60 = moles/minute. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from moles/minute back to moles/second, you must divide your starting value by 60. Our bidirectional tool automatically computes this inverse equation the moment you type into the mole/minute input field.

1 Mole/second is larger than 1 Mole/minute. Specifically, 1 Mole/second equals exactly 60 moles/minute, making it 60 times larger (a difference of 1.78 orders of magnitude). Therefore, quantities expressed in moles/minute require a larger numerical value to represent the same physical amount.

Under standard international measurement guidelines, 1 Mole/second converts to 60 moles/minute. Precise numerical conversion factors ensure consistency across laboratory, engineering, and field data.

Physically Coupled Chemical Engineering Converters

Explore interconnected physical dimension converters within the Chemical Engineering cluster (ISO 80000-9:2019).

View Hub
Concentration Molar Dimensional Hub & Tools
Concentration Solution Dimensional Hub & Tools
Specific Fuel Consumption Dimensional Hub & Tools
Energy Dimensional Hub & Tools