Skip to main content
0 results ↑ ↓ navigate, ↵ select

Moles/minute to Moles/second Converter (mol/min to mol/s)

Rate this converter 0 of 0 ratings
Instant calculation with 0ms overhead
Popular Converters
Live Conversion • ISO 80000-9:2019 Certified
1 Mole/minute = 0.016666667 Mole/second
1 mol/min = 0.0166667 mol/s • 1 mol/s = 60 mol/min
Mole/minute to Mole/second: One Mole/minute is equal to 0.016666667 Moles/second.
Certified Authority Value
0.01666667
mol/s
Exact: 1 mol/s ≡ 60 mol/min
mol/min
mol/min
Swap to Mole/second to Mole/minute
Swap to Mole/second to Mole/minute
mol/s
mol/s 0.016666667
Quick Values:
Conversion Formula
To convert Mole/minute to Mole/second, multiply by 0.016666667
mol/min × 0.016666667 = mol/s

Calculation: 1 mol/min × 0.016666667 = 0.016666667 mol/s

Common Mole/minute to Mole/second Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Mole/minute (mol/min) and Mole/second (mol/s).

Tap any row to calculate
Mole/minute to Mole/second: Primary Direct Table (15 Steps)
Mole/minute to Mole/second Conversion Reference Table
Conversion & Equivalent Value Scientific Notation
0.001 mol/min 1.666667 × 10⁻⁵ mol/s 1.667 × 10⁻⁵
0.01 mol/min 0.000166667 mol/s 1.667 × 10⁻⁴
0.1 mol/min 0.00166667 mol/s 1.667 × 10⁻³
0.5 mol/min 0.00833333 mol/s 8.333 × 10⁻³
1 mol/min 0.0166667 mol/s 1.667 × 10⁻²
2 mol/min 0.0333333 mol/s 3.333 × 10⁻²
5 mol/min 0.0833333 mol/s 8.333 × 10⁻²
10 mol/min 0.166667 mol/s 1.667 × 10⁻¹
20 mol/min 0.333333 mol/s 3.333 × 10⁻¹
25 mol/min 0.416667 mol/s 4.167 × 10⁻¹
50 mol/min 0.833333 mol/s 8.333 × 10⁻¹
100 mol/min 1.666667 mol/s 1.667 × 10⁰
250 mol/min 4.166667 mol/s 4.167 × 10⁰
500 mol/min 8.333333 mol/s 8.333 × 10⁰
1000 mol/min 16.666667 mol/s 1.667 × 10¹
Mole/second to Mole/minute: Reciprocal Summary
Mole/second to Mole/minute Conversion Reference Table
Reciprocal & Equivalent Value Scientific Notation
1 mol/s 60 mol/min 6 × 10¹
5 mol/s 300 mol/min 3 × 10²
10 mol/s 600 mol/min 6 × 10²
50 mol/s 3000 mol/min 3 × 10³
100 mol/s 6000 mol/min 6 × 10³
View Complete 15-Row Mole/second to Mole/minute Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Mole/minute (mol/min) and Mole/second (mol/s):

Mole/minute References:

  • Laboratory chemical distillation reflux vapor condensation rate 2 mol/min
  • Industrial flue gas scrubber CO2 chemical absorption rate 50 mol/min

Mole/second References:

  • Industrial Haber-Bosch ammonia synthesis reactor gas feed rate 1000 mol/s
  • Passenger automobile catalytic converter exhaust gas molar flow 10 mol/s
  • Commercial PEM fuel cell hydrogen consumption at full power 0.5 mol/s

Tap any benchmark above to automatically calculate its exact equivalent in Mole/second.

ISQ Dimension: [N T⁻¹] Coherent SI Unit: mole per second (mol/s) Fluid Dynamics & Rheology

How to Convert Mole/minute to Mole/second

Converting Mole/minute (mol/min) to Mole/second (mol/s) is a core calculation in Molar Flow Rate, which measures the chemical amount of substance (in moles) flowing through a boundary per unit of time. Because Mole/second is a broader physical scale than Mole/minute, converting from mol/min to mol/s condenses the numerical figure. It takes 60 Mole/minute to equal a single Mole/second (1 mol/min = 0.0166667 mol/s). To convert any quantity, multiply by 0.0166667 (or divide by 60).

Direct Factor1 mol/min = 0.0166667 mol/s
Inverse Ratio1 mol/s = 60 mol/min
Conversion ScaleDirect Proportional Magnitude Compression
First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (mole per second (mol/s)) without arbitrary rounding:

Vtarget=Vsource×(ksource→SIktarget→SI)V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)
Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)
1. Source SI Bridge (ksource):1 mol/min = 0.0166667 mole per second (mol/s)
2. Target SI Bridge (ktarget):1 mol/s = 1 mole per second (mol/s)
Step-by-step substitution for Mole/minute → Mole/second:V(mol/s) = V(mol/min) × ( 0.0166667 / 1 ) = V(mol/min) × 0.0166667
Mathematical FormulaValue in Mole/second = Value in Mole/minute × 0.016666667Direct computational formula applied for standard conversion.
Worked Example

Converting 8 mol/min yields an exact output of 0.133333 mol/s in Mole/second. Under higher industrial throughput, 100 mol/min translates to 1.666667 mol/s.

Inverse check: 1 mol/s = 60 mol/min.

Understanding Mole/minute and Mole/second

Mole/minute

mol/min
Standard Unit

A Mole/minute (mol/min) is a recognized unit for molar flow rate.

Applications & Practical Context

In practical flow molar terms, a laboratory chemical distillation reflux vapor condensation rate equals 2 mol/min, a industrial flue gas scrubber CO2 chemical absorption rate equals 50 mol/min.

Physical Setup

A physical magnitude of 1 mol/min corresponds to 0.0166667 mol/s in standard SI measurement.

Conversion to SI Unit: mole per second (mol/s)
1 mol/min = 0.0166667 mol/s

Mole/second

mol/s
SI Base Standard

A Mole/second (mol/s) is the official base standard unit for molar flow rate.

Applications & Practical Context

In practical flow molar terms, a industrial Haber-Bosch ammonia synthesis reactor gas feed rate equals 1000 mol/s, a passenger automobile catalytic converter exhaust gas molar flow equals 10 mol/s, a commercial PEM fuel cell hydrogen consumption at full power equals 0.5 mol/s.

Physical Setup

A molar flow rate of 1 mol/s corresponds to 1 Mole/second of molecular substance transported per unit time.

Conversion to SI Unit: mole per second (mol/s)
1 mol/s = 1 mol/s (Base Standard)

Domain Metrology & Engineering Applications

Governing Law & Equation

Stoichiometric Reaction Feed Dynamics (ṅ = dn/dt)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using thermal mass flow controllers (MFC) calibrated via gas chromatography, and Raman spectroscopy inline flow sensors.

Primary Industry Sectors

Applied across semiconductor chemical vapor deposition (CVD), petrochemical cracking reactor feed control, pharmaceutical synthesis, and industrial fermentation under international metrology standard ISO 80000-9:2019.

Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 80000-9:2019 and the BIPM SI Brochure (9th Edition). Governed by Stoichiometric Reaction Feed Dynamics (ṅ = dn/dt) under ISO 80000 dimensional vector [N T⁻¹].

Multi-Variable Engineering Bridge Stoichiometric Flow & Chemical Engineering

Molar Flow to Physical Mass Flow Bridge (kg/s • kg/h • lb/h • t/h)

Translate chemical molar flow (ṅ) into physical stream mass flow (ṁ) across industrial gases and reagents via molecular weight ṁ = ṅ × Mw, bridging molar throughput [N T⁻¹] and mass flow [M T⁻¹].

ṁ = ṅ × Mw
Vector: [mol/s] × [g/mol] × 10⁻³ → [kg/s]
Live Calculated Bridge Equivalent:
1 mol/min at Methane / Natural Gas CH₄ (16.04 g/mol) = 0.0002673 kg/s
Equals 0.9624 kg/h • 0.0005894 lb/s • 2.12 lb/h
SI Mass Flow
0.0002673
kg/s
Kilograms per Second
Industrial Process
0.9624
kg/h
Kilograms per Hour
US Mass Flow
0.0005894
lb/s
Pounds per Second
Boiler / Turbine Rating
2.12
lb/h
Pounds per Hour
Heavy Plant Header
0.0009624
t/h
Metric Tons per Hour
Chemical / Laboratory
0.2673
g/s
Grams per Second
  1. 1. Normalize Input to SI Base Unit (mol/s):
    ṅ = 1 mol/min × 0.01666667 = 0.01666667 mol/s
  2. 2. Apply Engineering Parameter (Mw):
    Selected condition: Methane / Natural Gas CH₄ (16.04 g/mol) at Mw = 16.04 g/mol
  3. 3. Execute Governing Physical Law in SI Units:
    ṁ = ṅ × Mw = (0.001 kg/g) × (16.04 g/mol) × (0.01666667 mol/s) = 0.00026733 kg/s
  4. 4. Convert to Standard Engineering Units:
    • kg/s: 0.00026733 × 1 = 0.0002673 kg/s (Kilograms per Second) • kg/h: 0.00026733 × 3600 = 0.9624 kg/h (Kilograms per Hour) • lb/s: 0.00026733 × 2.2046 = 0.0005894 lb/s (Pounds per Second) • lb/h: 0.00026733 × 7936.6414 = 2.12 lb/h (Pounds per Hour) • t/h: 0.00026733 × 3.6 = 0.0009624 t/h (Metric Tons per Hour) • g/s: 0.00026733 × 1000 = 0.2673 g/s (Grams per Second)
Explore Full Mass Flow Converter →
Engineering Substance / Operating Standard Parameter Value (g/mol) Reference State / Condition Typical Industrial & Engineering Application
Hydrogen Gas H₂ (2.016 g/mol) 2.016 Mw = 2.016 g/mol Fuel cell feeds & refinery hydrotreating
Methane / Natural Gas CH₄ (16.04 g/mol) 16.04 Mw = 16.04 g/mol Turbine fuel & syngas reforming
Steam / Water Vapor H₂O (18.02 g/mol) 18.02 Mw = 18.02 g/mol Thermal power & industrial boiler steam
Nitrogen N₂ (28.01 g/mol) 28.01 Mw = 28.01 g/mol Inert purging & cryogenic plant feed
Oxygen O₂ (32.00 g/mol) 32 Mw = 32.00 g/mol Oxy-fuel combustion & medical oxygen
Carbon Dioxide CO₂ (44.01 g/mol) 44.01 Mw = 44.01 g/mol Carbon capture & beverage carbonation
Embed
Need this Mole/minute to Mole/second calculator on your website, lab portal, or research blog?
Free HTML Widget 100% Responsive Zero Cookie Tracking
Notice a calculation discrepancy, rounding error, or glitch?
Help us maintain 100% scientific precision and report any issues directly to engineering.

Frequently Asked Questions

There are exactly 0.016666667 moles/second (mol/s) in 1 mole/minute (mol/min). To calculate larger amounts manually, simply multiply your total number of moles/minute by the conversion multiplier of 0.016666667.

The mathematical formula to convert moles/minute to moles/second is: [value] * 0.016666667 = moles/second. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from moles/second back to moles/minute, you must divide your starting value by 0.016666667. Our bidirectional tool automatically computes this inverse equation the moment you type into the mole/second input field.

1 Mole/second is larger than 1 Mole/minute. Specifically, 1 Mole/minute equals 0.016666667 moles/second, meaning 1 Mole/second is 60 times larger than 1 Mole/minute (a difference of 1.78 orders of magnitude). Expressing measurements in moles/minute requires a larger numerical value to represent the equivalent physical magnitude.

Under standard international measurement guidelines, 1 Mole/minute converts to 0.016666667 moles/second. Precise numerical conversion factors ensure consistency across laboratory, engineering, and field data.

Physically Coupled Chemical Engineering Converters

Explore interconnected physical dimension converters within the Chemical Engineering cluster (ISO 80000-9:2019).

View Hub
Concentration Molar Dimensional Hub & Tools
Concentration Solution Dimensional Hub & Tools
Specific Fuel Consumption Dimensional Hub & Tools
Energy Dimensional Hub & Tools