Poundals/square foot to Bars Converter (pdl/ft² to bar)

Rate this converter

Instant calculation with 0ms overhead

Popular Converters

Live Conversion • ISO 80000-4:2019 Certified

1 Poundal/square foot = 1.48816394 × 10⁻⁵ Bar

1 pdl/ft² = 1.488164 × 10⁻⁵ bar • 1 bar = 67196.897514 pdl/ft²

Decimals:

Certified Authority Value

0.00001488

bar

From / Input

pdl/ft²

Swap to Bar to Poundal/square foot

To / Result

bar

Quick Values:

Conversion Formula

To convert Poundal/square foot to Bar, multiply by 1.48816394 × 10⁻⁵

pdl/ft² × 1.48816394 × 10⁻⁵ = bar

Calculation: 1 pdl/ft² × 1.48816394 × 10⁻⁵ = 1.48816394 × 10⁻⁵ bar

Common Poundal/square foot to Bar Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Poundal/square foot (pdl/ft²) and Bar (bar).

Tap any row to calculate

Poundal/square foot to Bar: Primary Direct Table (15 Steps)

Rule: 1 Poundal/square foot is equal to 1.488164 × 10⁻⁵ bar (Bar)

Poundal/square foot to Bar Conversion Reference Table
Conversion & Equivalent Value	Scientific Notation
0.001 pdl/ft² 1.488164 × 10⁻⁸ bar	1.488 × 10⁻⁸
0.01 pdl/ft² 1.488164 × 10⁻⁷ bar	1.488 × 10⁻⁷
0.1 pdl/ft² 1.488164 × 10⁻⁶ bar	1.488 × 10⁻⁶
0.5 pdl/ft² 7.44082 × 10⁻⁶ bar	7.441 × 10⁻⁶
1 pdl/ft² 1.488164 × 10⁻⁵ bar	1.488 × 10⁻⁵
2 pdl/ft² 2.976328 × 10⁻⁵ bar	2.976 × 10⁻⁵
5 pdl/ft² 7.44082 × 10⁻⁵ bar	7.441 × 10⁻⁵
10 pdl/ft² 0.000148816 bar	1.488 × 10⁻⁴
20 pdl/ft² 0.000297633 bar	2.976 × 10⁻⁴
25 pdl/ft² 0.000372041 bar	3.72 × 10⁻⁴
50 pdl/ft² 0.000744082 bar	7.441 × 10⁻⁴
100 pdl/ft² 0.00148816 bar	1.488 × 10⁻³
250 pdl/ft² 0.00372041 bar	3.72 × 10⁻³
500 pdl/ft² 0.00744082 bar	7.441 × 10⁻³
1000 pdl/ft² 0.0148816 bar	1.488 × 10⁻²

Bar to Poundal/square foot: Reciprocal Summary

Rule: 1 Bar is equal to 67196.897514 pdl/ft² (Poundal/square foot)

Bar to Poundal/square foot Conversion Reference Table
Reciprocal & Equivalent Value	Scientific Notation
1 bar 67196.897514 pdl/ft²	6.72 × 10⁴
5 bar 335984.48757 pdl/ft²	3.36 × 10⁵
10 bar 671968.97514 pdl/ft²	6.72 × 10⁵
50 bar 3359844.875698 pdl/ft²	3.36 × 10⁶
100 bar 6719689.751395 pdl/ft²	6.72 × 10⁶

View Complete 15-Row Bar to Poundal/square foot Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Poundal/square foot (pdl/ft²) and Bar (bar):

Poundal/square foot References:

Absolute foot-pound-second system dynamic surface pressure unit 1 pdl/sq ft

Bar References:

Standard atmospheric pressure at sea level (1.01325 bar) 1 bar
Commercial espresso machine coffee extraction group head pressure 9 bar
Standard scuba diving compressed breathing air cylinder pressure 200 bar
Deep ocean floor water pressure at bottom of the Mariana Trench 1086 bar

Tap any benchmark above to automatically calculate its exact equivalent in Bar.

ISQ Dimension: [M L⁻¹ T⁻²] Coherent SI Unit: pascal (Pa) Chemical Engineering, Solutions & Physical Chemistry

How to Convert Poundal/square foot to Bar

Converting Poundal/square foot (pdl/ft²) to Bar (bar) is a core calculation in Pressure and Stress, which measures the perpendicular force exerted by a fluid or contact load per unit surface area. This calculation navigates the boundary between the International Metric System (SI) and British Imperial / US Customary engineering standards. In contemporary metrology, Imperial units are defined in terms of exact SI standards via international agreements—notably NIST SP 811 and the 1959 International Yard and Pound Agreement. Exactly 1 Poundal/square foot equals 1.488164 × 10⁻⁵ Bar, while 1 bar equals 67196.897514 pdl/ft².

Direct Factor1 pdl/ft² = 1.488164 × 10⁻⁵ bar

Inverse Ratio1 bar = 67196.897514 pdl/ft²

Conversion ScaleMetric SI to British Imperial / US Customary Bridge

First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (pascal (Pa)) without arbitrary rounding:

V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)

Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)

1. Source SI Bridge (k_source):1 pdl/ft² = 1.488164 pascal (Pa)

2. Target SI Bridge (k_target):1 bar = 100000 pascal (Pa)

Step-by-step substitution for Poundal/square foot → Bar:V(bar) = V(pdl/ft²) × ( 1.488164 / 100000 ) = V(pdl/ft²) × 1.488164 × 10⁻⁵

Mathematical FormulaValue in Bar = Value in Poundal/square foot × 1.48816394 × 10⁻⁵Direct computational formula applied for standard conversion.

Worked Example

Converting 75 pdl/ft² yields an exact output of 0.00111612 bar in Bar. Under higher industrial throughput, 1000 pdl/ft² translates to 0.0148816 bar.

Inverse check: 1 bar = 67196.897514 pdl/ft².

Understanding Poundal/square foot and Bar

Domain Metrology & Engineering Applications

Governing Law & Equation

Pascal's Principle of Fluid Pressure (P = F / A)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using primary deadweight piston gauges, piezoresistive silicon pressure transmitters, and Bourdon tube test gauges.

Primary Industry Sectors

Applied across aerospace hydraulic flight actuators, oil & gas pipeline monitoring, chemical autoclave pressure safety, and industrial compressed air under international metrology standard ISO 80000-4:2019, NIST SP 811.

Physical Orders of Magnitude & Laboratory Reference Benchmarks

Physical Phenomenon / Engineering Reference	Reference Value	Converted to Bar
Absolute foot-pound-second system dynamic surface pressure unit	`1 pdl/sq ft`	`1.488164 × 10⁻⁵ bar`

Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 80000-4:2019, NIST SP 811 and the BIPM SI Brochure (9th Edition). Governed by Pascal's Principle of Fluid Pressure (P = F / A) under ISO 80000 dimensional vector [M L⁻¹ T⁻²].

Multi-Variable Engineering Bridge Fluid Power & Hydraulic Thrust

Hydraulic Cylinder & Contact Area Force Bridge (Newtons • Kilonewtons • Meganewtons • Pounds-Force)

Calculate total mechanical actuator force and clamp load F = P × A across standard cylinder bore sizes, bridging fluid pressure [M L⁻¹ T⁻²] with mechanical force [M L T⁻²].

Input System Pressure (P): pdl/ft²

Select Cylinder Bore Area: 0.0079 m²

Governing Law: F = P × A

Vector: [Pa] × [m²] → [N]

Live Calculated Bridge Equivalent:

1 pdl/ft² at 100mm Heavy Excavator Boom Cylinder (0.007854 m²) = 0.01169 N

Equals 1.1688 × 10⁻⁵ kN • 1.168801 × 10⁻⁸ MN • 0.002628 lbf

SI Force

0.01169

Newtons

Structural / Civil

1.1688 × 10⁻⁵

Kilonewtons

Rocket / Geotechnical

1.168801 × 10⁻⁸

Meganewtons

US Engineering

0.002628

lbf

Pounds-Force

Metric Force

0.001192

kgf

Kilograms-Force

CGS Physics

1168.8

dyn

Dynes

Step-by-Step Numerical Derivation Proof View Derivation

1. Normalize Input to SI Base Unit (Pa):
P = 1 pdl/ft² × 1.48816394 = 1.48816394 Pa
2. Apply Engineering Parameter (A):
Selected condition: 100mm Heavy Excavator Boom Cylinder (0.007854 m²) at A = 0.007854 m²
3. Execute Governing Physical Law in SI Units:
F = P × A = (1.48816394 Pa) × (0.007854 m²) = 0.011688 N
4. Convert to Standard Engineering Units:
• N: 0.011688 × 1 = 0.01169 N (Newtons) • kN: 0.011688 × 0.001 = 1.1688 × 10⁻⁵ kN (Kilonewtons) • MN: 0.011688 × 1 × 10⁻⁶ = 1.168801 × 10⁻⁸ MN (Meganewtons) • lbf: 0.011688 × 0.2248 = 0.002628 lbf (Pounds-Force) • kgf: 0.011688 × 0.102 = 0.001192 kgf (Kilograms-Force) • dyn: 0.011688 × 100000 = 1168.8 dyn (Dynes)

Explore Full Area Converter →

Engineering Substance / Operating Standard	Parameter Value (m²)	Reference State / Condition	Typical Industrial & Engineering Application
25mm Pneumatic Cylinder (0.000491 m²)	`0.0004909`	0.000491 m²	1-inch pneumatic automation tooling
50mm Hydraulic Ram (0.001963 m²)	`0.001964`	0.001963 m²	2-inch mobile equipment ram
100mm Heavy Excavator Boom Cylinder (0.007854 m²)	`0.007854`	0.007854 m²	4-inch earthmoving boom cylinder
200mm Industrial Stamping Press (0.031416 m²)	`0.03142`	0.031416 m²	8-inch manufacturing stamping ram
500mm Hydroelectric Gate Actuator (0.19635 m²)	`0.1963`	0.19635 m²	20-inch dam gate hydraulic actuator

Frequently Asked Questions

There are exactly 1.48816394 × 10⁻⁵ bars (bar) in 1 poundal/square foot (pdl/ft²). To calculate larger amounts manually, simply multiply your total number of poundals/square foot by the conversion multiplier of 1.48816394 × 10⁻⁵.

The mathematical formula to convert poundals/square foot to bars is: [value] * 1.48816394 × 10⁻⁵ = bars. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from bars back to poundals/square foot, you must divide your starting value by 1.48816394 × 10⁻⁵. Our bidirectional tool automatically computes this inverse equation the moment you type into the bar input field.

1 Bar is larger than 1 Poundal/square foot. Specifically, 1 Poundal/square foot equals 1.48816394 × 10⁻⁵ bars, meaning 1 Bar is 67196.8975 times larger than 1 Poundal/square foot (a difference of 4.83 orders of magnitude). Expressing measurements in poundals/square foot requires a larger numerical value to represent the equivalent physical magnitude.

A typical absolute foot-pound-second system dynamic surface pressure unit measures 1 pdl/sq ft, which corresponds to 1.4882 × 10⁻⁵ bar (Bar).