Maxwells to Microwebers Converter (Mx to µWb)

Rate this converter

Instant calculation with 0ms overhead

Popular Converters

Live Conversion • ISO 80000-6:2022 Certified

1 Maxwell = 0.01 Microweber

1 Mx = 0.01 µWb • 1 µWb = 100 Mx

Decimals:

Certified Authority Value

0.01000000

µWb

From / Input

Swap to Microweber to Maxwell

To / Result

µWb

Quick Values:

Conversion Formula

To convert Maxwell to Microweber, multiply by 0.01

Mx × 0.01 = µWb

Calculation: 1 Mx × 0.01 = 0.01 µWb

Common Maxwell to Microweber Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Maxwell (Mx) and Microweber (µWb).

Tap any row to calculate

Maxwell to Microweber: Primary Direct Table (15 Steps)

Rule: 1 Maxwell is equal to 0.01 µWb (Microweber)

Maxwell to Microweber Conversion Reference Table
Conversion & Equivalent Value	Scientific Notation
0.001 Mx 1 × 10⁻⁵ µWb	1 × 10⁻⁵
0.01 Mx 0.0001 µWb	1 × 10⁻⁴
0.1 Mx 0.001 µWb	1 × 10⁻³
0.5 Mx 0.005 µWb	5 × 10⁻³
1 Mx 0.01 µWb	1 × 10⁻²
2 Mx 0.02 µWb	2 × 10⁻²
5 Mx 0.05 µWb	5 × 10⁻²
10 Mx 0.1 µWb	1 × 10⁻¹
20 Mx 0.2 µWb	2 × 10⁻¹
25 Mx 0.25 µWb	2.5 × 10⁻¹
50 Mx 0.5 µWb	5 × 10⁻¹
100 Mx 1 µWb	1 × 10⁰
250 Mx 2.5 µWb	2.5 × 10⁰
500 Mx 5 µWb	5 × 10⁰
1000 Mx 10 µWb	1 × 10¹

Microweber to Maxwell: Reciprocal Summary

Rule: 1 Microweber is equal to 100 Mx (Maxwell)

Microweber to Maxwell Conversion Reference Table
Reciprocal & Equivalent Value	Scientific Notation
1 µWb 100 Mx	1 × 10²
5 µWb 500 Mx	5 × 10²
10 µWb 1000 Mx	1 × 10³
50 µWb 5000 Mx	5 × 10³
100 µWb 10000 Mx	1 × 10⁴

View Complete 15-Row Microweber to Maxwell Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Maxwell (Mx) and Microweber (µWb):

Maxwell References:

CGS magnetic flux: Miniature quartz wristwatch stepping motor 5000 Mx
Small ferrite permanent magnet surface magnetic flux 20000 Mx

Microweber References:

Analog cassette tape magnetic recording audio head pickup flux 0.2 µWb
Bank credit card magnetic stripe swipe reader induction flux 1 µWb

Tap any benchmark above to automatically calculate its exact equivalent in Microweber.

ISQ Dimension: [M L² T⁻² I⁻¹] Coherent SI Unit: weber (Wb) Electromagnetism, Circuits & Field Theory

How to Convert Maxwell to Microweber

Converting Maxwell (Mx) to Microweber (µWb) is a core calculation in Magnetic Flux, which measures the total magnetic field passing through a given surface area. This calculation bridges modern MKSA metric standards with the historical Gaussian centimetre-gram-second (CGS) electrostatic and electromagnetic framework. In CGS systems, electromagnetic units (such as statvolts, abvolts, dynes, ergs, and gauss) are formulated directly from mechanical dimensions, with electrostatic-to-electromagnetic relations tied to the speed of light in vacuum (c ≈ 2.99792458 × 10¹⁰ cm/s). Exactly 1 Maxwell translates to 0.01 Microweber (1 µWb = 100 Mx).

Direct Factor1 Mx = 0.01 µWb

Inverse Ratio1 µWb = 100 Mx

Conversion ScaleSI to CGS Gaussian / ESU / EMU Bridge

First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (weber (Wb)) without arbitrary rounding:

V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)

Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)

1. Source SI Bridge (k_source):1 Mx = 1 × 10⁻⁸ weber (Wb)

2. Target SI Bridge (k_target):1 µWb = 1 × 10⁻⁶ weber (Wb)

Step-by-step substitution for Maxwell → Microweber:V(µWb) = V(Mx) × ( 1 × 10⁻⁸ / 1 × 10⁻⁶ ) = V(Mx) × 0.01

Mathematical FormulaValue in Microweber = Value in Maxwell × 0.01Direct computational formula applied for standard conversion.

Worked Example

For an engineering input of 15 Mx, applying the conversion factor yields exactly 0.15 µWb. At larger operational scale, 10000 Maxwell corresponds to 100 µWb.

Inverse check: 1 µWb = 100 Mx.

Understanding Maxwell and Microweber

Domain Metrology & Engineering Applications

Governing Law & Equation

Faraday's Law of Magnetic Induction (Φ = ∬ B · dA)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using electronic integrating fluxmeters, search coil Helmholtz pairs, and vibrating sample magnetometers (VSM).

Primary Industry Sectors

Applied across transformer core saturation testing, permanent magnet production quality control, magnetic recording heads, and particle accelerator dipoles under international metrology standard ISO 80000-6:2022.

Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 80000-6:2022 and the BIPM SI Brochure (9th Edition). Governed by Faraday's Law of Magnetic Induction (Φ = ∬ B · dA) under ISO 80000 dimensional vector [M L² T⁻² I⁻¹].

Multi-Variable Engineering Bridge Core Flux Distribution & Saturation Margin

Total Magnetic Flux to Flux Density Bridge (Tesla • Gauss • Millitesla • Microtesla • Webers)

Calculate core magnetic flux density B = Φ / A from total flux across core cross-sections, bridging magnetic flux [M L² T⁻² I⁻¹] and flux density [M T⁻² I⁻¹] via core area (A).

Input Total Magnetic Flux (Φ): Mx

Select Core Cross-Section Area: 0.01 m²

Governing Law: B = Φ / A

Vector: [Wb] ÷ [m²] → [T]

Live Calculated Bridge Equivalent:

1 Mx at Distribution Transformer Limb (0.01 m²) = 1 × 10⁻⁶ T

Equals 0.01 G • 0.001 mT • 1 μT

SI Induction

1 × 10⁻⁶

Tesla

CGS Standard

0.01

Gauss

Hall Sensor Scale

0.001

Millitesla

Geomagnetic Unit

μT

Microtesla

Total Flux (0.01m²)

1 × 10⁻⁸

Webers (0.01 m² Core)

CGS Flux (0.01m²)

Maxwells (0.01 m² Core)

Step-by-Step Numerical Derivation Proof View Derivation

1. Normalize Input to SI Base Unit (Wb):
Φ = 1 Mx × 1 × 10⁻⁸ = 1 × 10⁻⁸ Wb
2. Apply Engineering Parameter (A):
Selected condition: Distribution Transformer Limb (0.01 m²) at A = 0.01 m²
3. Execute Governing Physical Law in SI Units:
B = Φ / A = (1 × 10⁻⁸ Wb) ÷ (0.01 m²) = 1 × 10⁻⁶ T
4. Convert to Standard Engineering Units:
• T: 1 × 10⁻⁶ × 1 = 1 × 10⁻⁶ T (Tesla) • G: 1 × 10⁻⁶ × 10000 = 0.01 G (Gauss) • mT: 1 × 10⁻⁶ × 1000 = 0.001 mT (Millitesla) • μT: 1 × 10⁻⁶ × 1000000 = 1 μT (Microtesla) • Wb: 1 × 10⁻⁶ × 0.01 = 1 × 10⁻⁸ Wb (Webers (0.01 m² Core)) • Mx: 1 × 10⁻⁶ × 1000000 = 1 Mx (Maxwells (0.01 m² Core))

Explore Magnetic Flux Density Converter →

Engineering Substance / Operating Standard	Parameter Value (m²)	Reference State / Condition	Typical Industrial & Engineering Application
SMD Inductor Core (10 mm²)	`1 × 10⁻⁵`	1.0 × 10⁻⁵ m² (10 mm²)	Micro ferrite power inductor core
ETD49 Ferrite Transformer Core (211 mm²)	`0.000211`	2.11 × 10⁻⁴ m² (211 mm²)	Switched-mode power supply transformer
Distribution Transformer Limb (0.01 m²)	`0.01`	0.01 m² (100 cm²)	Pole-mounted distribution transformer limb
Heavy Substation Core Limb (0.08 m²)	`0.08`	0.08 m² (800 cm²)	Grid-scale power transformer core limb

Frequently Asked Questions

There are exactly 0.01 microwebers (µWb) in 1 maxwell (Mx). To calculate larger amounts manually, simply multiply your total number of maxwells by the conversion multiplier of 0.01.

The mathematical formula to convert maxwells to microwebers is: [value] * 0.01 = microwebers. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from microwebers back to maxwells, you must divide your starting value by 0.01. Our bidirectional tool automatically computes this inverse equation the moment you type into the microweber input field.

1 Microweber is larger than 1 Maxwell. Specifically, 1 Maxwell equals 0.01 microwebers, meaning 1 Microweber is 100 times larger than 1 Maxwell (a difference of 2.00 orders of magnitude). Expressing measurements in maxwells requires a larger numerical value to represent the equivalent physical magnitude.

Under standard international measurement guidelines, 1 Maxwell converts to 0.01 microwebers. Precise numerical conversion factors ensure consistency across laboratory, engineering, and field data.