Skip to main content
0 results ↑ ↓ navigate, ↵ select

Ergs/hour/square millimeter to Foot Pounds/minute/square foot Converter (erg/(h·mm²) to ft·lbf/(min·ft²))

Rate this converter 0 of 0 ratings
Instant calculation with 0ms overhead
Popular Converters
Live Conversion • ISO 80000-5:2019 Certified
1 Erg/hour/square millimeter = 0.00011420245 Foot pound/minute/square foot
1 erg/(h·mm²) = 0.000114202 ft·lbf/(min·ft²) • 1 ft·lbf/(min·ft²) = 8756.379619 erg/(h·mm²)
Erg/hour/square millimeter to Foot pound/minute/square foot: One Erg/hour/square millimeter is equal to 0.00011420245 Foot Pounds/minute/square foot.
Certified Authority Value
0.00011420
ft·lbf/(min·ft²)
Exact: 1 ft·lbf/(min·ft²) ≡ 8756.3796187766 erg/(h·mm²)
erg/(h·mm²)
erg/(h·mm²)
Swap to Foot pound/minute/square foot to Erg/hour/square millimeter
Swap to Foot pound/minute/square foot to Erg/hour/square millimeter
ft·lbf/(min·ft²)
ft·lbf/(min·ft²) 0.00011420245
Quick Values:
Conversion Formula
To convert Erg/hour/square millimeter to Foot pound/minute/square foot, multiply by 0.00011420245
erg/(h·mm²) × 0.00011420245 = ft·lbf/(min·ft²)

Calculation: 1 erg/(h·mm²) × 0.00011420245 = 0.00011420245 ft·lbf/(min·ft²)

Common Erg/hour/square millimeter to Foot pound/minute/square foot Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Erg/hour/square millimeter (erg/(h·mm²)) and Foot pound/minute/square foot (ft·lbf/(min·ft²)).

Tap any row to calculate
Erg/hour/square millimeter to Foot pound/minute/square foot: Primary Direct Table (15 Steps)
Erg/hour/square millimeter to Foot pound/minute/square foot Conversion Reference Table
Conversion & Equivalent Value Scientific Notation
0.001 erg/(h·mm²) 1.142024 × 10⁻⁷ ft·lbf/(min·ft²) 1.142 × 10⁻⁷
0.01 erg/(h·mm²) 1.142024 × 10⁻⁶ ft·lbf/(min·ft²) 1.142 × 10⁻⁶
0.1 erg/(h·mm²) 1.142024 × 10⁻⁵ ft·lbf/(min·ft²) 1.142 × 10⁻⁵
0.5 erg/(h·mm²) 5.710122 × 10⁻⁵ ft·lbf/(min·ft²) 5.71 × 10⁻⁵
1 erg/(h·mm²) 0.000114202 ft·lbf/(min·ft²) 1.142 × 10⁻⁴
2 erg/(h·mm²) 0.000228405 ft·lbf/(min·ft²) 2.284 × 10⁻⁴
5 erg/(h·mm²) 0.000571012 ft·lbf/(min·ft²) 5.71 × 10⁻⁴
10 erg/(h·mm²) 0.00114202 ft·lbf/(min·ft²) 1.142 × 10⁻³
20 erg/(h·mm²) 0.00228405 ft·lbf/(min·ft²) 2.284 × 10⁻³
25 erg/(h·mm²) 0.00285506 ft·lbf/(min·ft²) 2.855 × 10⁻³
50 erg/(h·mm²) 0.00571012 ft·lbf/(min·ft²) 5.71 × 10⁻³
100 erg/(h·mm²) 0.0114202 ft·lbf/(min·ft²) 1.142 × 10⁻²
250 erg/(h·mm²) 0.0285506 ft·lbf/(min·ft²) 2.855 × 10⁻²
500 erg/(h·mm²) 0.0571012 ft·lbf/(min·ft²) 5.71 × 10⁻²
1000 erg/(h·mm²) 0.114202 ft·lbf/(min·ft²) 1.142 × 10⁻¹
Foot pound/minute/square foot to Erg/hour/square millimeter: Reciprocal Summary
Foot pound/minute/square foot to Erg/hour/square millimeter Conversion Reference Table
Reciprocal & Equivalent Value Scientific Notation
1 ft·lbf/(min·ft²) 8756.379619 erg/(h·mm²) 8.756 × 10³
5 ft·lbf/(min·ft²) 43781.898094 erg/(h·mm²) 4.378 × 10⁴
10 ft·lbf/(min·ft²) 87563.796188 erg/(h·mm²) 8.756 × 10⁴
50 ft·lbf/(min·ft²) 437818.980939 erg/(h·mm²) 4.378 × 10⁵
100 ft·lbf/(min·ft²) 875637.961878 erg/(h·mm²) 8.756 × 10⁵
View Complete 15-Row Foot pound/minute/square foot to Erg/hour/square millimeter Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Erg/hour/square millimeter (erg/(h·mm²)) and Foot pound/minute/square foot (ft·lbf/(min·ft²)):

Erg/hour/square millimeter References:

  • Micro-machined MEMS sensor thermal dissipation flux rate 36000 erg/(h·mm²)

Foot pound/minute/square foot References:

  • Mechanical friction heating flux on brake drum friction lining 2500 ft·lbf/(min·ft²)

Tap any benchmark above to automatically calculate its exact equivalent in Foot pound/minute/square foot.

ISQ Dimension: [M T⁻³] Coherent SI Unit: watt per square meter (W/m²) Thermodynamics & Heat Transfer

How to Convert Erg/hour/square millimeter to Foot pound/minute/square foot

Converting Erg/hour/square millimeter (erg/(h·mm²)) to Foot pound/minute/square foot (ft·lbf/(min·ft²)) is a core calculation in Heat Flux Density, which measures the rate of thermal energy transfer radiating or conducting through a unit area per second. This calculation bridges modern MKSA metric standards with the historical Gaussian centimetre-gram-second (CGS) electrostatic and electromagnetic framework. In CGS systems, electromagnetic units (such as statvolts, abvolts, dynes, ergs, and gauss) are formulated directly from mechanical dimensions, with electrostatic-to-electromagnetic relations tied to the speed of light in vacuum (c ≈ 2.99792458 × 1010 cm/s). Exactly 1 Erg/hour/square millimeter translates to 0.000114202 Foot pound/minute/square foot (1 ft·lbf/(min·ft²) = 8756.379619 erg/(h·mm²)).

Direct Factor1 erg/(h·mm²) = 0.000114202 ft·lbf/(min·ft²)
Inverse Ratio1 ft·lbf/(min·ft²) = 8756.379619 erg/(h·mm²)
Conversion ScaleSI to CGS Gaussian / ESU / EMU Bridge
First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (watt per square meter (W/m²)) without arbitrary rounding:

Vtarget=Vsource×(ksource→SIktarget→SI)V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)
Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)
1. Source SI Bridge (ksource):1 erg/(h·mm²) = 2.777778 × 10⁻⁵ watt per square meter (W/m²)
2. Target SI Bridge (ktarget):1 ft·lbf/(min·ft²) = 0.243233 watt per square meter (W/m²)
Step-by-step substitution for Erg/hour/square millimeter → Foot pound/minute/square foot:V(ft·lbf/(min·ft²)) = V(erg/(h·mm²)) × ( 2.777778 × 10⁻⁵ / 0.243233 ) = V(erg/(h·mm²)) × 0.000114202
Mathematical FormulaValue in Foot pound/minute/square foot = Value in Erg/hour/square millimeter × 0.00011420245Direct computational formula applied for standard conversion.
Worked Example

To convert 12 Erg/hour/square millimeter (erg/(h·mm²)) to Foot pound/minute/square foot (ft·lbf/(min·ft²)): multiply 12 by 0.000114202 to get 0.00137043 ft·lbf/(min·ft²). At an industrial engineering scale, 5000 erg/(h·mm²) converts to 0.571012 ft·lbf/(min·ft²).

Inverse check: 1 ft·lbf/(min·ft²) = 8756.379619 erg/(h·mm²).

Understanding Erg/hour/square millimeter and Foot pound/minute/square foot

Erg/hour/square millimeter

erg/(h·mm²)
CGS System

An Erg/hour/square millimeter (erg/(h·mm²)) is a unit of heat flux density in the centimeter-gram-second (CGS) system.

Applications & Practical Context

In practical heat flux density terms, a micro-machined MEMS sensor thermal dissipation flux rate equals 36000 erg/(h·mm²).

Physical Setup

A physical magnitude of 1 erg/(h·mm²) corresponds to 2.777778 × 10⁻⁵ W/m² in standard SI measurement.

Conversion to SI Unit: watt per square meter (W/m²)
1 erg/(h·mm²) = 2.777778 × 10⁻⁵ W/m²

Foot pound/minute/square foot

ft·lbf/(min·ft²)
Imperial / US

A Foot pound/minute/square foot (ft·lbf/(min·ft²)) is an imperial and US customary unit for heat flux density.

Applications & Practical Context

In practical heat flux density terms, a mechanical friction heating flux on brake drum friction lining equals 2500 ft·lbf/(min·ft²).

Physical Setup

A physical magnitude of 1 ft·lbf/(min·ft²) corresponds to 0.243233 W/m² in standard SI measurement.

Conversion to SI Unit: watt per square meter (W/m²)
1 ft·lbf/(min·ft²) = 0.243233 W/m²

Domain Metrology & Engineering Applications

Governing Law & Equation

Thermal Transmission Flux (q = Q̇ / A)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using Schmidt-Boelter heat flux gauges, differential thermopile foil transducers, and calibrated Gardon radiant gauges.

Primary Industry Sectors

Applied across rocket nozzle combustion chamber analysis, fire resistance testing (ASTM E119), furnace wall heat loss auditing, and hypersonic aerothermal design under international metrology standard ISO 80000-5:2019, ASME PTC 19.3.

Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 80000-5:2019, ASME PTC 19.3 and the BIPM SI Brochure (9th Edition). Governed by Thermal Transmission Flux (q = Q̇ / A) under ISO 80000 dimensional vector [M T⁻³].

Multi-Variable Engineering Bridge Thermal Radiation & Power Dissipation

Heat Flux Density to Total Thermal Power Bridge (Watts • Kilowatts • Megawatts • BTU/h • Horsepower)

Calculate total continuous heat dissipation power P = q" × A across surface barriers and exchangers, bridging heat flux density [M T⁻³] with thermal power [M L² T⁻³].

P = q" × A
Vector: [W/m²] × [m²] → [W]
Live Calculated Bridge Equivalent:
1 erg/(h·mm²) at Industrial Hydronic Radiator Panel (8 m²) = 0.0002222 W
Equals 2.2222 × 10⁻⁷ kW • 2.222222 × 10⁻¹⁰ MW • 2.98 × 10⁻⁷ hp
SI Power
0.0002222
W
Watts
Grid / Utility
2.2222 × 10⁻⁷
kW
Kilowatts
Power Plant
2.222222 × 10⁻¹⁰
MW
Megawatts
Mechanical Rating
2.98 × 10⁻⁷
hp
Horsepower (Mechanical)
Metric Horsepower
3.0214 × 10⁻⁷
PS
Metric Horsepower (PS)
HVAC Thermal Rating
0.00076
BTU/h
BTU per Hour
  1. 1. Normalize Input to SI Base Unit (W/m²):
    q" = 1 erg/(h·mm²) × 2.77777778 × 10⁻⁵ = 2.77777778 × 10⁻⁵ W/m²
  2. 2. Apply Engineering Parameter (A):
    Selected condition: Industrial Hydronic Radiator Panel (8 m²) at A = 8 m²
  3. 3. Execute Governing Physical Law in SI Units:
    P = q" × A = (2.77777778 × 10⁻⁵ W/m²) × (8 m²) = 0.00022222 W
  4. 4. Convert to Standard Engineering Units:
    • W: 0.00022222 × 1 = 0.0002222 W (Watts) • kW: 0.00022222 × 0.001 = 2.2222 × 10⁻⁷ kW (Kilowatts) • MW: 0.00022222 × 1 × 10⁻⁶ = 2.222222 × 10⁻¹⁰ MW (Megawatts) • hp: 0.00022222 × 0.001341 = 2.98 × 10⁻⁷ hp (Horsepower (Mechanical)) • PS: 0.00022222 × 0.00136 = 3.0214 × 10⁻⁷ PS (Metric Horsepower (PS)) • BTU/h: 0.00022222 × 3.4121 = 0.00076 BTU/h (BTU per Hour)
Explore Full Power Converter →
Engineering Substance / Operating Standard Parameter Value (m²) Reference State / Condition Typical Industrial & Engineering Application
Residential Window Glazing (4 m²) 4 4.0 m² Double-pane exterior window glass aperture
Industrial Hydronic Radiator Panel (8 m²) 8 8.0 m² Convective space heating radiator surface
Shell & Tube Heat Exchanger (50 m²) 50 50.0 m² Industrial process fluid cooling bundle
Power Boiler Waterwall (200 m²) 200 200.0 m² Thermal power plant steam generator wall
Embed
Need this Erg/hour/square millimeter to Foot pound/minute/square foot calculator on your website, lab portal, or research blog?
Free HTML Widget 100% Responsive Zero Cookie Tracking
Notice a calculation discrepancy, rounding error, or glitch?
Help us maintain 100% scientific precision and report any issues directly to engineering.

Frequently Asked Questions

There are exactly 0.00011420245 foot pounds/minute/square foot (ft·lbf/(min·ft²)) in 1 erg/hour/square millimeter (erg/(h·mm²)). To calculate larger amounts manually, simply multiply your total number of ergs/hour/square millimeter by the conversion multiplier of 0.00011420245.

The mathematical formula to convert ergs/hour/square millimeter to foot pounds/minute/square foot is: [value] * 0.00011420245 = foot pounds/minute/square foot. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from foot pounds/minute/square foot back to ergs/hour/square millimeter, you must divide your starting value by 0.00011420245. Our bidirectional tool automatically computes this inverse equation the moment you type into the foot pound/minute/square foot input field.

1 Foot pound/minute/square foot is larger than 1 Erg/hour/square millimeter. Specifically, 1 Erg/hour/square millimeter equals 0.00011420245 foot pounds/minute/square foot, meaning 1 Foot pound/minute/square foot is 8756.3796 times larger than 1 Erg/hour/square millimeter (a difference of 3.94 orders of magnitude). Expressing measurements in ergs/hour/square millimeter requires a larger numerical value to represent the equivalent physical magnitude.

Under standard international measurement guidelines, 1 Erg/hour/square millimeter converts to 0.00011420245 foot pounds/minute/square foot. Precise numerical conversion factors ensure consistency across laboratory, engineering, and field data.