Skip to main content
0 results ↑ ↓ navigate, ↵ select

Ergs/hour/square millimeter to Btus (IT)/minute/square foot Converter (erg/(h·mm²) to Btu/(min·ft²))

Rate this converter 0 of 0 ratings
Instant calculation with 0ms overhead
Popular Converters
Live Conversion • ISO 80000-5:2019 Certified
1 Erg/hour/square millimeter = 1.46758486 × 10⁻⁷ Btu (IT)/minute/square foot
1 erg/(h·mm²) = 1.467585 × 10⁻⁷ Btu/(min·ft²) • 1 Btu/(min·ft²) = 6813916.009336 erg/(h·mm²)
Erg/hour/square millimeter to Btu (IT)/minute/square foot: One Erg/hour/square millimeter is equal to 1.46758486 × 10⁻⁷ Btus (IT)/minute/square foot.
Certified Authority Value
0.00000015
Btu/(min·ft²)
Exact: 1 Btu/(min·ft²) ≡ 6813916.0093361847 erg/(h·mm²)
erg/(h·mm²)
erg/(h·mm²)
Swap to Btu (IT)/minute/square foot to Erg/hour/square millimeter
Swap to Btu (IT)/minute/square foot to Erg/hour/square millimeter
Btu/(min·ft²)
Btu/(min·ft²) 1.46758486 × 10⁻⁷
Quick Values:
Conversion Formula
To convert Erg/hour/square millimeter to Btu (IT)/minute/square foot, multiply by 1.46758486 × 10⁻⁷
erg/(h·mm²) × 1.46758486 × 10⁻⁷ = Btu/(min·ft²)

Calculation: 1 erg/(h·mm²) × 1.46758486 × 10⁻⁷ = 1.46758486 × 10⁻⁷ Btu/(min·ft²)

Common Erg/hour/square millimeter to Btu (IT)/minute/square foot Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Erg/hour/square millimeter (erg/(h·mm²)) and Btu (IT)/minute/square foot (Btu/(min·ft²)).

Tap any row to calculate
Erg/hour/square millimeter to Btu (IT)/minute/square foot: Primary Direct Table (15 Steps)
Erg/hour/square millimeter to Btu (IT)/minute/square foot Conversion Reference Table
Conversion & Equivalent Value Scientific Notation
0.001 erg/(h·mm²) 1.467585 × 10⁻¹⁰ Btu/(min·ft²) 1.468 × 10⁻¹⁰
0.01 erg/(h·mm²) 1.467585 × 10⁻⁹ Btu/(min·ft²) 1.468 × 10⁻⁹
0.1 erg/(h·mm²) 1.467585 × 10⁻⁸ Btu/(min·ft²) 1.468 × 10⁻⁸
0.5 erg/(h·mm²) 7.337924 × 10⁻⁸ Btu/(min·ft²) 7.338 × 10⁻⁸
1 erg/(h·mm²) 1.467585 × 10⁻⁷ Btu/(min·ft²) 1.468 × 10⁻⁷
2 erg/(h·mm²) 2.93517 × 10⁻⁷ Btu/(min·ft²) 2.935 × 10⁻⁷
5 erg/(h·mm²) 7.337924 × 10⁻⁷ Btu/(min·ft²) 7.338 × 10⁻⁷
10 erg/(h·mm²) 1.467585 × 10⁻⁶ Btu/(min·ft²) 1.468 × 10⁻⁶
20 erg/(h·mm²) 2.93517 × 10⁻⁶ Btu/(min·ft²) 2.935 × 10⁻⁶
25 erg/(h·mm²) 3.668962 × 10⁻⁶ Btu/(min·ft²) 3.669 × 10⁻⁶
50 erg/(h·mm²) 7.337924 × 10⁻⁶ Btu/(min·ft²) 7.338 × 10⁻⁶
100 erg/(h·mm²) 1.467585 × 10⁻⁵ Btu/(min·ft²) 1.468 × 10⁻⁵
250 erg/(h·mm²) 3.668962 × 10⁻⁵ Btu/(min·ft²) 3.669 × 10⁻⁵
500 erg/(h·mm²) 7.337924 × 10⁻⁵ Btu/(min·ft²) 7.338 × 10⁻⁵
1000 erg/(h·mm²) 0.000146758 Btu/(min·ft²) 1.468 × 10⁻⁴
Btu (IT)/minute/square foot to Erg/hour/square millimeter: Reciprocal Summary
Btu (IT)/minute/square foot to Erg/hour/square millimeter Conversion Reference Table
Reciprocal & Equivalent Value Scientific Notation
1 Btu/(min·ft²) 6813916.009336 erg/(h·mm²) 6.814 × 10⁶
5 Btu/(min·ft²) 3.406958 × 10⁷ erg/(h·mm²) 3.407 × 10⁷
10 Btu/(min·ft²) 6.813916 × 10⁷ erg/(h·mm²) 6.814 × 10⁷
50 Btu/(min·ft²) 3.406958 × 10⁸ erg/(h·mm²) 3.407 × 10⁸
100 Btu/(min·ft²) 6.813916 × 10⁸ erg/(h·mm²) 6.814 × 10⁸
View Complete 15-Row Btu (IT)/minute/square foot to Erg/hour/square millimeter Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Erg/hour/square millimeter (erg/(h·mm²)) and Btu (IT)/minute/square foot (Btu/(min·ft²)):

Erg/hour/square millimeter References:

  • Micro-machined MEMS sensor thermal dissipation flux rate 36000 erg/(h·mm²)

Btu (IT)/minute/square foot References:

  • Steel blast furnace external shell cooling water spray flux 25 Btu/(min·ft²)

Tap any benchmark above to automatically calculate its exact equivalent in Btu (IT)/minute/square foot.

ISQ Dimension: [M T⁻³] Coherent SI Unit: watt per square meter (W/m²) Thermodynamics & Heat Transfer

How to Convert Erg/hour/square millimeter to Btu (IT)/minute/square foot

Converting Erg/hour/square millimeter (erg/(h·mm²)) to Btu (IT)/minute/square foot (Btu/(min·ft²)) is a core calculation in Heat Flux Density, which measures the rate of thermal energy transfer radiating or conducting through a unit area per second. This calculation bridges modern MKSA metric standards with the historical Gaussian centimetre-gram-second (CGS) electrostatic and electromagnetic framework. In CGS systems, electromagnetic units (such as statvolts, abvolts, dynes, ergs, and gauss) are formulated directly from mechanical dimensions, with electrostatic-to-electromagnetic relations tied to the speed of light in vacuum (c ≈ 2.99792458 × 1010 cm/s). Exactly 1 Erg/hour/square millimeter translates to 1.467585 × 10⁻⁷ Btu (IT)/minute/square foot (1 Btu/(min·ft²) = 6813916.009336 erg/(h·mm²)).

Direct Factor1 erg/(h·mm²) = 1.467585 × 10⁻⁷ Btu/(min·ft²)
Inverse Ratio1 Btu/(min·ft²) = 6813916.009336 erg/(h·mm²)
Conversion ScaleSI to CGS Gaussian / ESU / EMU Bridge
First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (watt per square meter (W/m²)) without arbitrary rounding:

Vtarget=Vsource×(ksource→SIktarget→SI)V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)
Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)
1. Source SI Bridge (ksource):1 erg/(h·mm²) = 2.777778 × 10⁻⁵ watt per square meter (W/m²)
2. Target SI Bridge (ktarget):1 Btu/(min·ft²) = 189.275445 watt per square meter (W/m²)
Step-by-step substitution for Erg/hour/square millimeter → Btu (IT)/minute/square foot:V(Btu/(min·ft²)) = V(erg/(h·mm²)) × ( 2.777778 × 10⁻⁵ / 189.275445 ) = V(erg/(h·mm²)) × 1.467585 × 10⁻⁷
Mathematical FormulaValue in Btu (IT)/minute/square foot = Value in Erg/hour/square millimeter × 1.46758486 × 10⁻⁷Direct computational formula applied for standard conversion.
Worked Example

For an engineering input of 75 erg/(h·mm²), applying the conversion factor yields exactly 1.100689 × 10⁻⁵ Btu/(min·ft²). At larger operational scale, 100 Erg/hour/square millimeter corresponds to 1.467585 × 10⁻⁵ Btu/(min·ft²).

Inverse check: 1 Btu/(min·ft²) = 6813916.009336 erg/(h·mm²).

Understanding Erg/hour/square millimeter and Btu (IT)/minute/square foot

Erg/hour/square millimeter

erg/(h·mm²)
CGS System

An Erg/hour/square millimeter (erg/(h·mm²)) is a unit of heat flux density in the centimeter-gram-second (CGS) system.

Applications & Practical Context

In practical heat flux density terms, a micro-machined MEMS sensor thermal dissipation flux rate equals 36000 erg/(h·mm²).

Physical Setup

A physical magnitude of 1 erg/(h·mm²) corresponds to 2.777778 × 10⁻⁵ W/m² in standard SI measurement.

Conversion to SI Unit: watt per square meter (W/m²)
1 erg/(h·mm²) = 2.777778 × 10⁻⁵ W/m²

Btu (IT)/minute/square foot

Btu/(min·ft²)
Imperial / US

A Btu (IT)/minute/square foot (Btu/(min·ft²)) is an imperial and US customary unit for heat flux density.

Applications & Practical Context

In practical heat flux density terms, a steel blast furnace external shell cooling water spray flux equals 25 Btu/(min·ft²).

Physical Setup

A physical magnitude of 1 Btu/(min·ft²) corresponds to 189.275445 W/m² in standard SI measurement.

Conversion to SI Unit: watt per square meter (W/m²)
1 Btu/(min·ft²) = 189.275445 W/m²

Domain Metrology & Engineering Applications

Governing Law & Equation

Thermal Transmission Flux (q = Q̇ / A)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using Schmidt-Boelter heat flux gauges, differential thermopile foil transducers, and calibrated Gardon radiant gauges.

Primary Industry Sectors

Applied across rocket nozzle combustion chamber analysis, fire resistance testing (ASTM E119), furnace wall heat loss auditing, and hypersonic aerothermal design under international metrology standard ISO 80000-5:2019, ASME PTC 19.3.

Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 80000-5:2019, ASME PTC 19.3 and the BIPM SI Brochure (9th Edition). Governed by Thermal Transmission Flux (q = Q̇ / A) under ISO 80000 dimensional vector [M T⁻³].

Multi-Variable Engineering Bridge Thermal Radiation & Power Dissipation

Heat Flux Density to Total Thermal Power Bridge (Watts • Kilowatts • Megawatts • BTU/h • Horsepower)

Calculate total continuous heat dissipation power P = q" × A across surface barriers and exchangers, bridging heat flux density [M T⁻³] with thermal power [M L² T⁻³].

P = q" × A
Vector: [W/m²] × [m²] → [W]
Live Calculated Bridge Equivalent:
1 erg/(h·mm²) at Industrial Hydronic Radiator Panel (8 m²) = 0.0002222 W
Equals 2.2222 × 10⁻⁷ kW • 2.222222 × 10⁻¹⁰ MW • 2.98 × 10⁻⁷ hp
SI Power
0.0002222
W
Watts
Grid / Utility
2.2222 × 10⁻⁷
kW
Kilowatts
Power Plant
2.222222 × 10⁻¹⁰
MW
Megawatts
Mechanical Rating
2.98 × 10⁻⁷
hp
Horsepower (Mechanical)
Metric Horsepower
3.0214 × 10⁻⁷
PS
Metric Horsepower (PS)
HVAC Thermal Rating
0.00076
BTU/h
BTU per Hour
  1. 1. Normalize Input to SI Base Unit (W/m²):
    q" = 1 erg/(h·mm²) × 2.77777778 × 10⁻⁵ = 2.77777778 × 10⁻⁵ W/m²
  2. 2. Apply Engineering Parameter (A):
    Selected condition: Industrial Hydronic Radiator Panel (8 m²) at A = 8 m²
  3. 3. Execute Governing Physical Law in SI Units:
    P = q" × A = (2.77777778 × 10⁻⁵ W/m²) × (8 m²) = 0.00022222 W
  4. 4. Convert to Standard Engineering Units:
    • W: 0.00022222 × 1 = 0.0002222 W (Watts) • kW: 0.00022222 × 0.001 = 2.2222 × 10⁻⁷ kW (Kilowatts) • MW: 0.00022222 × 1 × 10⁻⁶ = 2.222222 × 10⁻¹⁰ MW (Megawatts) • hp: 0.00022222 × 0.001341 = 2.98 × 10⁻⁷ hp (Horsepower (Mechanical)) • PS: 0.00022222 × 0.00136 = 3.0214 × 10⁻⁷ PS (Metric Horsepower (PS)) • BTU/h: 0.00022222 × 3.4121 = 0.00076 BTU/h (BTU per Hour)
Explore Full Power Converter →
Engineering Substance / Operating Standard Parameter Value (m²) Reference State / Condition Typical Industrial & Engineering Application
Residential Window Glazing (4 m²) 4 4.0 m² Double-pane exterior window glass aperture
Industrial Hydronic Radiator Panel (8 m²) 8 8.0 m² Convective space heating radiator surface
Shell & Tube Heat Exchanger (50 m²) 50 50.0 m² Industrial process fluid cooling bundle
Power Boiler Waterwall (200 m²) 200 200.0 m² Thermal power plant steam generator wall
Embed
Need this Erg/hour/square millimeter to Btu (IT)/minute/square foot calculator on your website, lab portal, or research blog?
Free HTML Widget 100% Responsive Zero Cookie Tracking
Notice a calculation discrepancy, rounding error, or glitch?
Help us maintain 100% scientific precision and report any issues directly to engineering.

Frequently Asked Questions

There are exactly 1.46758486 × 10⁻⁷ btus (it)/minute/square foot (Btu/(min·ft²)) in 1 erg/hour/square millimeter (erg/(h·mm²)). To calculate larger amounts manually, simply multiply your total number of ergs/hour/square millimeter by the conversion multiplier of 1.46758486 × 10⁻⁷.

The mathematical formula to convert ergs/hour/square millimeter to btus (it)/minute/square foot is: [value] * 1.46758486 × 10⁻⁷ = btus (it)/minute/square foot. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from btus (it)/minute/square foot back to ergs/hour/square millimeter, you must divide your starting value by 1.46758486 × 10⁻⁷. Our bidirectional tool automatically computes this inverse equation the moment you type into the btu (it)/minute/square foot input field.

1 Btu (IT)/minute/square foot is larger than 1 Erg/hour/square millimeter. Specifically, 1 Erg/hour/square millimeter equals 1.46758486 × 10⁻⁷ btus (it)/minute/square foot, meaning 1 Btu (IT)/minute/square foot is 6813916.0093 times larger than 1 Erg/hour/square millimeter (a difference of 6.83 orders of magnitude). Expressing measurements in ergs/hour/square millimeter requires a larger numerical value to represent the equivalent physical magnitude.

Under standard international measurement guidelines, 1 Erg/hour/square millimeter converts to 1.46758486 × 10⁻⁷ btus (it)/minute/square foot. Precise numerical conversion factors ensure consistency across laboratory, engineering, and field data.