Skip to main content
0 results ↑ ↓ navigate, ↵ select

Dynes/hour/centimeter to Calories (th)/hour/square centimeter Converter (dyn/(h·cm) to cal (th)/(h·cm²))

Rate this converter 0 of 0 ratings
Instant calculation with 0ms overhead
Popular Converters
Live Conversion • ISO 80000-5:2019 Certified
1 Dyne/hour/centimeter = 2.39005833 × 10⁻⁶ Calorie (th)/hour/square centimeter
1 dyn/(h·cm) = 2.390058 × 10⁻⁶ cal (th)/(h·cm²) • 1 cal (th)/(h·cm²) = 418399.829851 dyn/(h·cm)
Dyne/hour/centimeter to Calorie (th)/hour/square centimeter: One Dyne/hour/centimeter is equal to 2.39005833 × 10⁻⁶ Calories (th)/hour/square centimeter.
Certified Authority Value
0.00000239
cal (th)/(h·cm²)
Exact: 1 cal (th)/(h·cm²) ≡ 418399.8298507359 dyn/(h·cm)
dyn/(h·cm)
dyn/(h·cm)
Swap to Calorie (th)/hour/square centimeter to Dyne/hour/centimeter
Swap to Calorie (th)/hour/square centimeter to Dyne/hour/centimeter
cal (th)/(h·cm²)
cal (th)/(h·cm²) 2.39005833 × 10⁻⁶
Quick Values:
Conversion Formula
To convert Dyne/hour/centimeter to Calorie (th)/hour/square centimeter, multiply by 2.39005833 × 10⁻⁶
dyn/(h·cm) × 2.39005833 × 10⁻⁶ = cal (th)/(h·cm²)

Calculation: 1 dyn/(h·cm) × 2.39005833 × 10⁻⁶ = 2.39005833 × 10⁻⁶ cal (th)/(h·cm²)

Common Dyne/hour/centimeter to Calorie (th)/hour/square centimeter Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Dyne/hour/centimeter (dyn/(h·cm)) and Calorie (th)/hour/square centimeter (cal (th)/(h·cm²)).

Tap any row to calculate
Dyne/hour/centimeter to Calorie (th)/hour/square centimeter: Primary Direct Table (15 Steps)
Dyne/hour/centimeter to Calorie (th)/hour/square centimeter Conversion Reference Table
Conversion & Equivalent Value Scientific Notation
0.001 dyn/(h·cm) 2.390058 × 10⁻⁹ cal (th)/(h·cm²) 2.39 × 10⁻⁹
0.01 dyn/(h·cm) 2.390058 × 10⁻⁸ cal (th)/(h·cm²) 2.39 × 10⁻⁸
0.1 dyn/(h·cm) 2.390058 × 10⁻⁷ cal (th)/(h·cm²) 2.39 × 10⁻⁷
0.5 dyn/(h·cm) 1.195029 × 10⁻⁶ cal (th)/(h·cm²) 1.195 × 10⁻⁶
1 dyn/(h·cm) 2.390058 × 10⁻⁶ cal (th)/(h·cm²) 2.39 × 10⁻⁶
2 dyn/(h·cm) 4.780117 × 10⁻⁶ cal (th)/(h·cm²) 4.78 × 10⁻⁶
5 dyn/(h·cm) 1.195029 × 10⁻⁵ cal (th)/(h·cm²) 1.195 × 10⁻⁵
10 dyn/(h·cm) 2.390058 × 10⁻⁵ cal (th)/(h·cm²) 2.39 × 10⁻⁵
20 dyn/(h·cm) 4.780117 × 10⁻⁵ cal (th)/(h·cm²) 4.78 × 10⁻⁵
25 dyn/(h·cm) 5.975146 × 10⁻⁵ cal (th)/(h·cm²) 5.975 × 10⁻⁵
50 dyn/(h·cm) 0.000119503 cal (th)/(h·cm²) 1.195 × 10⁻⁴
100 dyn/(h·cm) 0.000239006 cal (th)/(h·cm²) 2.39 × 10⁻⁴
250 dyn/(h·cm) 0.000597515 cal (th)/(h·cm²) 5.975 × 10⁻⁴
500 dyn/(h·cm) 0.00119503 cal (th)/(h·cm²) 1.195 × 10⁻³
1000 dyn/(h·cm) 0.00239006 cal (th)/(h·cm²) 2.39 × 10⁻³
Calorie (th)/hour/square centimeter to Dyne/hour/centimeter: Reciprocal Summary
Calorie (th)/hour/square centimeter to Dyne/hour/centimeter Conversion Reference Table
Reciprocal & Equivalent Value Scientific Notation
1 cal (th)/(h·cm²) 418399.829851 dyn/(h·cm) 4.184 × 10⁵
5 cal (th)/(h·cm²) 2091999.149254 dyn/(h·cm) 2.092 × 10⁶
10 cal (th)/(h·cm²) 4183998.298507 dyn/(h·cm) 4.184 × 10⁶
50 cal (th)/(h·cm²) 2.091999 × 10⁷ dyn/(h·cm) 2.092 × 10⁷
100 cal (th)/(h·cm²) 4.183998 × 10⁷ dyn/(h·cm) 4.184 × 10⁷
View Complete 15-Row Calorie (th)/hour/square centimeter to Dyne/hour/centimeter Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Dyne/hour/centimeter (dyn/(h·cm)) and Calorie (th)/hour/square centimeter (cal (th)/(h·cm²)):

Dyne/hour/centimeter References:

  • CGS heat flux unit: Low-temperature cryogenic boil-off flux 5000 dyn/(h·cm)

Calorie (th)/hour/square centimeter References:

  • Glass greenhouse passive solar heating transmission flux 60 cal (th)/(h·cm²)

Tap any benchmark above to automatically calculate its exact equivalent in Calorie (th)/hour/square centimeter.

ISQ Dimension: [M T⁻³] Coherent SI Unit: watt per square meter (W/m²) Thermodynamics & Heat Transfer

How to Convert Dyne/hour/centimeter to Calorie (th)/hour/square centimeter

Converting Dyne/hour/centimeter (dyn/(h·cm)) to Calorie (th)/hour/square centimeter (cal (th)/(h·cm²)) is a core calculation in Heat Flux Density, which measures the rate of thermal energy transfer radiating or conducting through a unit area per second. This calculation bridges modern MKSA metric standards with the historical Gaussian centimetre-gram-second (CGS) electrostatic and electromagnetic framework. In CGS systems, electromagnetic units (such as statvolts, abvolts, dynes, ergs, and gauss) are formulated directly from mechanical dimensions, with electrostatic-to-electromagnetic relations tied to the speed of light in vacuum (c ≈ 2.99792458 × 1010 cm/s). Exactly 1 Dyne/hour/centimeter translates to 2.390058 × 10⁻⁶ Calorie (th)/hour/square centimeter (1 cal (th)/(h·cm²) = 418399.829851 dyn/(h·cm)).

Direct Factor1 dyn/(h·cm) = 2.390058 × 10⁻⁶ cal (th)/(h·cm²)
Inverse Ratio1 cal (th)/(h·cm²) = 418399.829851 dyn/(h·cm)
Conversion ScaleSI to CGS Gaussian / ESU / EMU Bridge
First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (watt per square meter (W/m²)) without arbitrary rounding:

Vtarget=Vsource×(ksource→SIktarget→SI)V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)
Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)
1. Source SI Bridge (ksource):1 dyn/(h·cm) = 2.777778 × 10⁻⁵ watt per square meter (W/m²)
2. Target SI Bridge (ktarget):1 cal (th)/(h·cm²) = 11.622217 watt per square meter (W/m²)
Step-by-step substitution for Dyne/hour/centimeter → Calorie (th)/hour/square centimeter:V(cal (th)/(h·cm²)) = V(dyn/(h·cm)) × ( 2.777778 × 10⁻⁵ / 11.622217 ) = V(dyn/(h·cm)) × 2.390058 × 10⁻⁶
Mathematical FormulaValue in Calorie (th)/hour/square centimeter = Value in Dyne/hour/centimeter × 2.39005833 × 10⁻⁶Direct computational formula applied for standard conversion.
Worked Example

To convert 2.5 Dyne/hour/centimeter (dyn/(h·cm)) to Calorie (th)/hour/square centimeter (cal (th)/(h·cm²)): multiply 2.5 by 2.390058 × 10⁻⁶ to get 5.975146 × 10⁻⁶ cal (th)/(h·cm²). At an industrial engineering scale, 480 dyn/(h·cm) converts to 0.00114723 cal (th)/(h·cm²).

Inverse check: 1 cal (th)/(h·cm²) = 418399.829851 dyn/(h·cm).

Understanding Dyne/hour/centimeter and Calorie (th)/hour/square centimeter

Dyne/hour/centimeter

dyn/(h·cm)
CGS System

A Dyne/hour/centimeter (dyn/(h·cm)) is a unit of heat flux density in the centimeter-gram-second (CGS) system.

Applications & Practical Context

In practical heat flux density terms, a CGS heat flux unit: Low-temperature cryogenic boil-off flux equals 5000 dyn/(h·cm).

Physical Setup

A physical magnitude of 1 dyn/(h·cm) corresponds to 2.777778 × 10⁻⁵ W/m² in standard SI measurement.

Conversion to SI Unit: watt per square meter (W/m²)
1 dyn/(h·cm) = 2.777778 × 10⁻⁵ W/m²

Calorie (th)/hour/square centimeter

cal (th)/(h·cm²)
Standard Unit

A Calorie (th)/hour/square centimeter (cal (th)/(h·cm²)) is a recognized unit for heat flux density.

Applications & Practical Context

In practical heat flux density terms, a glass greenhouse passive solar heating transmission flux equals 60 cal (th)/(h·cm²).

Physical Setup

A physical magnitude of 1 cal (th)/(h·cm²) corresponds to 11.622217 W/m² in standard SI measurement.

Conversion to SI Unit: watt per square meter (W/m²)
1 cal (th)/(h·cm²) = 11.622217 W/m²

Domain Metrology & Engineering Applications

Governing Law & Equation

Thermal Transmission Flux (q = Q̇ / A)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using Schmidt-Boelter heat flux gauges, differential thermopile foil transducers, and calibrated Gardon radiant gauges.

Primary Industry Sectors

Applied across rocket nozzle combustion chamber analysis, fire resistance testing (ASTM E119), furnace wall heat loss auditing, and hypersonic aerothermal design under international metrology standard ISO 80000-5:2019, ASME PTC 19.3.

Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 80000-5:2019, ASME PTC 19.3 and the BIPM SI Brochure (9th Edition). Governed by Thermal Transmission Flux (q = Q̇ / A) under ISO 80000 dimensional vector [M T⁻³].

Multi-Variable Engineering Bridge Thermal Radiation & Power Dissipation

Heat Flux Density to Total Thermal Power Bridge (Watts • Kilowatts • Megawatts • BTU/h • Horsepower)

Calculate total continuous heat dissipation power P = q" × A across surface barriers and exchangers, bridging heat flux density [M T⁻³] with thermal power [M L² T⁻³].

P = q" × A
Vector: [W/m²] × [m²] → [W]
Live Calculated Bridge Equivalent:
1 dyn/(h·cm) at Industrial Hydronic Radiator Panel (8 m²) = 0.0002222 W
Equals 2.2222 × 10⁻⁷ kW • 2.222222 × 10⁻¹⁰ MW • 2.98 × 10⁻⁷ hp
SI Power
0.0002222
W
Watts
Grid / Utility
2.2222 × 10⁻⁷
kW
Kilowatts
Power Plant
2.222222 × 10⁻¹⁰
MW
Megawatts
Mechanical Rating
2.98 × 10⁻⁷
hp
Horsepower (Mechanical)
Metric Horsepower
3.0214 × 10⁻⁷
PS
Metric Horsepower (PS)
HVAC Thermal Rating
0.00076
BTU/h
BTU per Hour
  1. 1. Normalize Input to SI Base Unit (W/m²):
    q" = 1 dyn/(h·cm) × 2.77777778 × 10⁻⁵ = 2.77777778 × 10⁻⁵ W/m²
  2. 2. Apply Engineering Parameter (A):
    Selected condition: Industrial Hydronic Radiator Panel (8 m²) at A = 8 m²
  3. 3. Execute Governing Physical Law in SI Units:
    P = q" × A = (2.77777778 × 10⁻⁵ W/m²) × (8 m²) = 0.00022222 W
  4. 4. Convert to Standard Engineering Units:
    • W: 0.00022222 × 1 = 0.0002222 W (Watts) • kW: 0.00022222 × 0.001 = 2.2222 × 10⁻⁷ kW (Kilowatts) • MW: 0.00022222 × 1 × 10⁻⁶ = 2.222222 × 10⁻¹⁰ MW (Megawatts) • hp: 0.00022222 × 0.001341 = 2.98 × 10⁻⁷ hp (Horsepower (Mechanical)) • PS: 0.00022222 × 0.00136 = 3.0214 × 10⁻⁷ PS (Metric Horsepower (PS)) • BTU/h: 0.00022222 × 3.4121 = 0.00076 BTU/h (BTU per Hour)
Explore Full Power Converter →
Engineering Substance / Operating Standard Parameter Value (m²) Reference State / Condition Typical Industrial & Engineering Application
Residential Window Glazing (4 m²) 4 4.0 m² Double-pane exterior window glass aperture
Industrial Hydronic Radiator Panel (8 m²) 8 8.0 m² Convective space heating radiator surface
Shell & Tube Heat Exchanger (50 m²) 50 50.0 m² Industrial process fluid cooling bundle
Power Boiler Waterwall (200 m²) 200 200.0 m² Thermal power plant steam generator wall
Embed
Need this Dyne/hour/centimeter to Calorie (th)/hour/square centimeter calculator on your website, lab portal, or research blog?
Free HTML Widget 100% Responsive Zero Cookie Tracking
Notice a calculation discrepancy, rounding error, or glitch?
Help us maintain 100% scientific precision and report any issues directly to engineering.

Frequently Asked Questions

There are exactly 2.39005833 × 10⁻⁶ calories (th)/hour/square centimeter (cal (th)/(h·cm²)) in 1 dyne/hour/centimeter (dyn/(h·cm)). To calculate larger amounts manually, simply multiply your total number of dynes/hour/centimeter by the conversion multiplier of 2.39005833 × 10⁻⁶.

The mathematical formula to convert dynes/hour/centimeter to calories (th)/hour/square centimeter is: [value] * 2.39005833 × 10⁻⁶ = calories (th)/hour/square centimeter. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from calories (th)/hour/square centimeter back to dynes/hour/centimeter, you must divide your starting value by 2.39005833 × 10⁻⁶. Our bidirectional tool automatically computes this inverse equation the moment you type into the calorie (th)/hour/square centimeter input field.

1 Calorie (th)/hour/square centimeter is larger than 1 Dyne/hour/centimeter. Specifically, 1 Dyne/hour/centimeter equals 2.39005833 × 10⁻⁶ calories (th)/hour/square centimeter, meaning 1 Calorie (th)/hour/square centimeter is 418399.8299 times larger than 1 Dyne/hour/centimeter (a difference of 5.62 orders of magnitude). Expressing measurements in dynes/hour/centimeter requires a larger numerical value to represent the equivalent physical magnitude.

Under standard international measurement guidelines, 1 Dyne/hour/centimeter converts to 2.39005833 × 10⁻⁶ calories (th)/hour/square centimeter. Precise numerical conversion factors ensure consistency across laboratory, engineering, and field data.