Skip to main content
0 results ↑ ↓ navigate, ↵ select

Candela Steradians/sq. meter to Phots Converter (cd·sr/m² to ph)

Rate this converter 0 of 0 ratings
Instant calculation with 0ms overhead
Popular Converters
Live Conversion • ISO 8995:2002 Certified
1 Candela steradian/sq. meter = 0.0001 Phot
1 cd·sr/m² = 0.0001 ph • 1 ph = 10,000 cd·sr/m²
Candela steradian/sq. meter to Phot: One Candela steradian/sq. meter is equal to 0.0001 Phots.
Certified Authority Value
0.00010000
ph
Exact: 1 ph ≡ 10000 cd·sr/m²
cd·sr/m²
cd·sr/m²
Swap to Phot to Candela steradian/sq. meter
Swap to Phot to Candela steradian/sq. meter
ph
ph 0.0001
Quick Values:
Conversion Formula
To convert Candela steradian/sq. meter to Phot, multiply by 0.0001
cd·sr/m² × 0.0001 = ph

Calculation: 1 cd·sr/m² × 0.0001 = 0.0001 ph

Common Candela steradian/sq. meter to Phot Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Candela steradian/sq. meter (cd·sr/m²) and Phot (ph).

Tap any row to calculate
Candela steradian/sq. meter to Phot: Primary Direct Table (15 Steps)
Candela steradian/sq. meter to Phot Conversion Reference Table
Conversion & Equivalent Value Scientific Notation
0.001 cd·sr/m² 1 × 10⁻⁷ ph 1 × 10⁻⁷
0.01 cd·sr/m² 1 × 10⁻⁶ ph 1 × 10⁻⁶
0.1 cd·sr/m² 1 × 10⁻⁵ ph 1 × 10⁻⁵
0.5 cd·sr/m² 5 × 10⁻⁵ ph 5 × 10⁻⁵
1 cd·sr/m² 0.0001 ph 1 × 10⁻⁴
2 cd·sr/m² 0.0002 ph 2 × 10⁻⁴
5 cd·sr/m² 0.0005 ph 5 × 10⁻⁴
10 cd·sr/m² 0.001 ph 1 × 10⁻³
20 cd·sr/m² 0.002 ph 2 × 10⁻³
25 cd·sr/m² 0.0025 ph 2.5 × 10⁻³
50 cd·sr/m² 0.005 ph 5 × 10⁻³
100 cd·sr/m² 0.01 ph 1 × 10⁻²
250 cd·sr/m² 0.025 ph 2.5 × 10⁻²
500 cd·sr/m² 0.05 ph 5 × 10⁻²
1000 cd·sr/m² 0.1 ph 1 × 10⁻¹
Phot to Candela steradian/sq. meter: Reciprocal Summary
Phot to Candela steradian/sq. meter Conversion Reference Table
Reciprocal & Equivalent Value Scientific Notation
1 ph 10000 cd·sr/m² 1 × 10⁴
5 ph 50000 cd·sr/m² 5 × 10⁴
10 ph 100000 cd·sr/m² 1 × 10⁵
50 ph 500000 cd·sr/m² 5 × 10⁵
100 ph 1000000 cd·sr/m² 1 × 10⁶
View Complete 15-Row Phot to Candela steradian/sq. meter Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Candela steradian/sq. meter (cd·sr/m²) and Phot (ph):

Candela steradian/sq. meter References:

  • Night sky illumination under clear full moon light 0.25 cd·sr/m²
  • Cozy family living room ambient evening indoor illumination 50 cd·sr/m²
  • Standard commercial office workspace desk illumination 500 cd·sr/m²
  • Precision surgical hospital operating table light level 10000 cd·sr/m²

Phot References:

  • Centimeter-gram-second illumination unit equal to 10,000 lux 1 ph

Tap any benchmark above to automatically calculate its exact equivalent in Phot.

ISQ Dimension: [L⁻² J] Coherent SI Unit: lux (lx) Photometry, Radiometry, Optics & Acoustics

How to Convert Candela steradian/sq. meter to Phot

Converting Candela steradian/sq. meter (cd·sr/m²) to Phot (ph) is a core calculation in Illuminance, which measures the total luminous flux incident and received upon a unit surface area. Both units reside within the International System of Units (SI) and share an identical physical dimension vector ([L⁻² J]), separated strictly by a decimal order-of-magnitude factor (10^-4). Because this shift involves integer powers of 10, the conversion is mathematically exact and free from decimal rounding or irrational fractional loss. Exactly 1 Candela steradian/sq. meter equals 0.0001 Phot.

Direct Factor1 cd·sr/m² = 0.0001 ph
Inverse Ratio1 ph = 10000 cd·sr/m²
Conversion ScalePure SI Metric Prefix Shift (10ⁿ Decimal Scaling)
First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (lux (lx)) without arbitrary rounding:

Vtarget=Vsource×(ksource→SIktarget→SI)V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)
Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)
1. Source SI Bridge (ksource):1 cd·sr/m² = 1 lux (lx)
2. Target SI Bridge (ktarget):1 ph = 10000 lux (lx)
Step-by-step substitution for Candela steradian/sq. meter → Phot:V(ph) = V(cd·sr/m²) × ( 1 / 10000 ) = V(cd·sr/m²) × 0.0001
Mathematical FormulaValue in Phot = Value in Candela steradian/sq. meter × 0.0001Direct computational formula applied for standard conversion.
Worked Example

Converting 75 cd·sr/m² yields an exact output of 0.0075 ph in Phot. Under higher industrial throughput, 100 cd·sr/m² translates to 0.01 ph.

Inverse check: 1 ph = 10000 cd·sr/m².

Understanding Candela steradian/sq. meter and Phot

Candela steradian/sq. meter

cd·sr/m²
Standard Unit

A Candela steradian/sq. meter (cd·sr/m²) is a recognized unit for illuminance.

Applications & Practical Context

In practical illumination terms, a night sky illumination under clear full moon light equals 0.25 cd·sr/m², a cozy family living room ambient evening indoor illumination equals 50 cd·sr/m², a standard commercial office workspace desk illumination equals 500 cd·sr/m².

Physical Setup

An illuminance of 1 cd·sr/m² corresponds to 1 Candela steradian/sq. meter of uniform luminous flux illuminating a 1-square-meter surface.

Conversion to SI Unit: lux (lx)
1 cd·sr/m² = 1 lx

Phot

ph
Standard Unit

A Phot (ph) is a recognized unit for illuminance.

Applications & Practical Context

In practical illumination terms, a centimeter-gram-second illumination unit equal to 10,000 lux equals 1 ph.

Physical Setup

A physical magnitude of 1 ph corresponds to 10000 lx in standard SI measurement.

Conversion to SI Unit: lux (lx)
1 ph = 10000 lx

Domain Metrology & Engineering Applications

Governing Law & Equation

Photometric Inverse Square Law (E_v = Φ_v / A)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using cosine-corrected silicon photodiode luxmeters, multi-point illuminance grid loggers, and spectral light meters.

Primary Industry Sectors

Applied across commercial architectural lighting compliance, museum light damage prevention, greenhouse horticultural lighting, and industrial workplace safety under international metrology standard ISO 8995:2002, ISO 80000-7:2019.

Physical Orders of Magnitude & Laboratory Reference Benchmarks

Physical Phenomenon / Engineering ReferenceReference ValueConverted to Phot
Centimeter-gram-second illumination unit equal to 10,000 lux1 ph0.0001 ph
Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 8995:2002, ISO 80000-7:2019 and the BIPM SI Brochure (9th Edition). Governed by Photometric Inverse Square Law (E_v = Φ_v / A) under ISO 80000 dimensional vector [L⁻² J].

Multi-Variable Engineering Bridge Architectural Lighting & Photometric Flux

Illuminance to Total Incident Luminous Flux Bridge (Lumens • Millilumens • Kilolumens • MSCP)

Calculate total incident luminous flux Φ = E_v × A captured across work surfaces and architectural envelopes, bridging surface illuminance [L⁻² J] and total luminous flux [J] via surface area (A).

Φ = E_v × A
Vector: [lx] × [m²] → [lm]
Live Calculated Bridge Equivalent:
1 cd·sr/m² at Commercial Office Floor (25 m²) = 25 lm
Equals 25000 mlm • 0.025 klm • 1.9894 MSCP
SI Luminous Flux
25
lm
Lumens
Fiber Optics
25000
mlm
Millilumens
Commercial Floodlight
0.025
klm
Kilolumens
Lamp Rating
1.9894
MSCP
Mean Spherical Candlepower
English Standard
1.9894
cp-flux
Candlepower Flux
Stadium Array
2.5 × 10⁻⁵
Mlm
Megalumens
  1. 1. Normalize Input to SI Base Unit (lx):
    E_v = 1 cd·sr/m² × 1 = 1 lx
  2. 2. Apply Engineering Parameter (A):
    Selected condition: Commercial Office Floor (25 m²) at A = 25 m²
  3. 3. Execute Governing Physical Law in SI Units:
    Φ = E_v × A = (1 lx) × (25 m²) = 25 lm
  4. 4. Convert to Standard Engineering Units:
    • lm: 25 × 1 = 25 lm (Lumens) • mlm: 25 × 1000 = 25000 mlm (Millilumens) • klm: 25 × 0.001 = 0.025 klm (Kilolumens) • MSCP: 25 × 0.07958 = 1.9894 MSCP (Mean Spherical Candlepower) • cp-flux: 25 × 0.07958 = 1.9894 cp-flux (Candlepower Flux) • Mlm: 25 × 1 × 10⁻⁶ = 2.5 × 10⁻⁵ Mlm (Megalumens)
Explore Illuminance Converter →
Engineering Substance / Operating Standard Parameter Value (m²) Reference State / Condition Typical Industrial & Engineering Application
Executive Desk Work Surface (1.5 m²) 1.5 1.5 m² (16 ft²) Standard office task-plane lighting footprint
Commercial Office Floor (25 m²) 25 25.0 m² (269 ft²) Standard 5m × 5m open office workstation area
School Classroom Floor (60 m²) 60 60.0 m² (646 ft²) Standard academic lecture / study room
Industrial Warehouse Bay (500 m²) 500 500.0 m² (5,380 ft²) Logistics distribution racking corridor
FIFA Competition Football Pitch (7,140 m²) 7140 7,140 m² (76,854 ft²) Stadium tournament playing pitch (105m × 68m)
Embed
Need this Candela steradian/sq. meter to Phot calculator on your website, lab portal, or research blog?
Free HTML Widget 100% Responsive Zero Cookie Tracking
Notice a calculation discrepancy, rounding error, or glitch?
Help us maintain 100% scientific precision and report any issues directly to engineering.

Frequently Asked Questions

There are exactly 0.0001 phots (ph) in 1 candela steradian/sq. meter (cd·sr/m²). To calculate larger amounts manually, simply multiply your total number of candela steradians/sq. meter by the conversion multiplier of 0.0001.

The mathematical formula to convert candela steradians/sq. meter to phots is: [value] * 0.0001 = phots. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from phots back to candela steradians/sq. meter, you must divide your starting value by 0.0001. Our bidirectional tool automatically computes this inverse equation the moment you type into the phot input field.

1 Phot is larger than 1 Candela steradian/sq. meter. Specifically, 1 Candela steradian/sq. meter equals 0.0001 phots, meaning 1 Phot is 10000 times larger than 1 Candela steradian/sq. meter (a difference of 4.00 orders of magnitude). Expressing measurements in candela steradians/sq. meter requires a larger numerical value to represent the equivalent physical magnitude.

Under standard international measurement guidelines, 1 Candela steradian/sq. meter converts to 0.0001 phots. Precise numerical conversion factors ensure consistency across laboratory, engineering, and field data.

Physically Coupled Optics & Acoustics Converters

Explore interconnected physical dimension converters within the Optics & Acoustics cluster (ISO 80000-7:2019 / ISO 80000-8:2020).

View Hub
Frequency Dimensional Hub & Tools
Sound Dimensional Hub & Tools
Luminous Intensity Dimensional Hub & Tools
Luminance Dimensional Hub & Tools
Digital Image Resolution Dimensional Hub & Tools