Skip to main content
0 results ↑ ↓ navigate, ↵ select

Calories (it)/second/square centimeter to Ergs/hour/square millimeter Converter (cal/(s·cm²) to erg/(h·mm²))

Rate this converter 0 of 0 ratings
Instant calculation with 0ms overhead
Popular Converters
Live Conversion • ISO 80000-5:2019 Certified
1 Calorie (IT)/second/square centimeter = 1.507248 × 10⁹ Erg/hour/square millimeter
1 cal/(s·cm²) = 1.507248 × 10⁹ erg/(h·mm²) • 1 erg/(h·mm²) = 6.634608 × 10⁻¹⁰ cal/(s·cm²)
Calorie (IT)/second/square centimeter to Erg/hour/square millimeter: One Calorie (IT)/second/square centimeter is equal to 1.507248 × 10⁹ Ergs/hour/square millimeter.
Certified Authority Value
1507248000.00000024
erg/(h·mm²)
Exact: 1 erg/(h·mm²) ≡ 6.6346082397 × 10⁻¹⁰ cal/(s·cm²)
cal/(s·cm²)
cal/(s·cm²)
Swap to Erg/hour/square millimeter to Calorie (IT)/second/square centimeter
Swap to Erg/hour/square millimeter to Calorie (IT)/second/square centimeter
erg/(h·mm²)
erg/(h·mm²) 1.507248 × 10⁹
Quick Values:
Conversion Formula
To convert Calorie (IT)/second/square centimeter to Erg/hour/square millimeter, multiply by 1.507248 × 10⁹
cal/(s·cm²) × 1.507248 × 10⁹ = erg/(h·mm²)

Calculation: 1 cal/(s·cm²) × 1.507248 × 10⁹ = 1.507248 × 10⁹ erg/(h·mm²)

Common Calorie (IT)/second/square centimeter to Erg/hour/square millimeter Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Calorie (IT)/second/square centimeter (cal/(s·cm²)) and Erg/hour/square millimeter (erg/(h·mm²)).

Tap any row to calculate
Calorie (IT)/second/square centimeter to Erg/hour/square millimeter: Primary Direct Table (15 Steps)
Calorie (IT)/second/square centimeter to Erg/hour/square millimeter Conversion Reference Table
Conversion & Equivalent Value Scientific Notation
0.001 cal/(s·cm²) 1507248 erg/(h·mm²) 1.507 × 10⁶
0.01 cal/(s·cm²) 1.507248 × 10⁷ erg/(h·mm²) 1.507 × 10⁷
0.1 cal/(s·cm²) 1.507248 × 10⁸ erg/(h·mm²) 1.507 × 10⁸
0.5 cal/(s·cm²) 7.53624 × 10⁸ erg/(h·mm²) 7.536 × 10⁸
1 cal/(s·cm²) 1.507248 × 10⁹ erg/(h·mm²) 1.507 × 10⁹
2 cal/(s·cm²) 3.014496 × 10⁹ erg/(h·mm²) 3.014 × 10⁹
5 cal/(s·cm²) 7.53624 × 10⁹ erg/(h·mm²) 7.536 × 10⁹
10 cal/(s·cm²) 1.507248 × 10¹⁰ erg/(h·mm²) 1.507 × 10¹⁰
20 cal/(s·cm²) 3.014496 × 10¹⁰ erg/(h·mm²) 3.014 × 10¹⁰
25 cal/(s·cm²) 3.76812 × 10¹⁰ erg/(h·mm²) 3.768 × 10¹⁰
50 cal/(s·cm²) 7.53624 × 10¹⁰ erg/(h·mm²) 7.536 × 10¹⁰
100 cal/(s·cm²) 1.507248 × 10¹¹ erg/(h·mm²) 1.507 × 10¹¹
250 cal/(s·cm²) 3.76812 × 10¹¹ erg/(h·mm²) 3.768 × 10¹¹
500 cal/(s·cm²) 7.53624 × 10¹¹ erg/(h·mm²) 7.536 × 10¹¹
1000 cal/(s·cm²) 1.507248 × 10¹² erg/(h·mm²) 1.507 × 10¹²
Erg/hour/square millimeter to Calorie (IT)/second/square centimeter: Reciprocal Summary
Erg/hour/square millimeter to Calorie (IT)/second/square centimeter Conversion Reference Table
Reciprocal & Equivalent Value Scientific Notation
1 erg/(h·mm²) 6.634608 × 10⁻¹⁰ cal/(s·cm²) 6.635 × 10⁻¹⁰
5 erg/(h·mm²) 3.317304 × 10⁻⁹ cal/(s·cm²) 3.317 × 10⁻⁹
10 erg/(h·mm²) 6.634608 × 10⁻⁹ cal/(s·cm²) 6.635 × 10⁻⁹
50 erg/(h·mm²) 3.317304 × 10⁻⁸ cal/(s·cm²) 3.317 × 10⁻⁸
100 erg/(h·mm²) 6.634608 × 10⁻⁸ cal/(s·cm²) 6.635 × 10⁻⁸
View Complete 15-Row Erg/hour/square millimeter to Calorie (IT)/second/square centimeter Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Calorie (IT)/second/square centimeter (cal/(s·cm²)) and Erg/hour/square millimeter (erg/(h·mm²)):

Calorie (IT)/second/square centimeter References:

  • Welding oxy-acetylene torch flame concentrated heat flux 5 cal/(s·cm²)

Erg/hour/square millimeter References:

  • Micro-machined MEMS sensor thermal dissipation flux rate 36000 erg/(h·mm²)

Tap any benchmark above to automatically calculate its exact equivalent in Erg/hour/square millimeter.

ISQ Dimension: [M T⁻³] Coherent SI Unit: watt per square meter (W/m²) Thermodynamics & Heat Transfer

How to Convert Calorie (IT)/second/square centimeter to Erg/hour/square millimeter

Converting Calorie (IT)/second/square centimeter (cal/(s·cm²)) to Erg/hour/square millimeter (erg/(h·mm²)) is a core calculation in Heat Flux Density, which measures the rate of thermal energy transfer radiating or conducting through a unit area per second. This calculation bridges modern MKSA metric standards with the historical Gaussian centimetre-gram-second (CGS) electrostatic and electromagnetic framework. In CGS systems, electromagnetic units (such as statvolts, abvolts, dynes, ergs, and gauss) are formulated directly from mechanical dimensions, with electrostatic-to-electromagnetic relations tied to the speed of light in vacuum (c ≈ 2.99792458 × 1010 cm/s). Exactly 1 Calorie (IT)/second/square centimeter translates to 1.507248 × 10⁹ Erg/hour/square millimeter (1 erg/(h·mm²) = 6.634608 × 10⁻¹⁰ cal/(s·cm²)).

Direct Factor1 cal/(s·cm²) = 1.507248 × 10⁹ erg/(h·mm²)
Inverse Ratio1 erg/(h·mm²) = 6.634608 × 10⁻¹⁰ cal/(s·cm²)
Conversion ScaleSI to CGS Gaussian / ESU / EMU Bridge
First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (watt per square meter (W/m²)) without arbitrary rounding:

Vtarget=Vsource×(ksource→SIktarget→SI)V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)
Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)
1. Source SI Bridge (ksource):1 cal/(s·cm²) = 41868 watt per square meter (W/m²)
2. Target SI Bridge (ktarget):1 erg/(h·mm²) = 2.777778 × 10⁻⁵ watt per square meter (W/m²)
Step-by-step substitution for Calorie (IT)/second/square centimeter → Erg/hour/square millimeter:V(erg/(h·mm²)) = V(cal/(s·cm²)) × ( 41868 / 2.777778 × 10⁻⁵ ) = V(cal/(s·cm²)) × 1.507248 × 10⁹
Mathematical FormulaValue in Erg/hour/square millimeter = Value in Calorie (IT)/second/square centimeter × 1.507248 × 10⁹Direct computational formula applied for standard conversion.
Worked Example

To convert 50 Calorie (IT)/second/square centimeter (cal/(s·cm²)) to Erg/hour/square millimeter (erg/(h·mm²)): multiply 50 by 1.507248 × 10⁹ to get 7.53624 × 10¹⁰ erg/(h·mm²). At an industrial engineering scale, 240 cal/(s·cm²) converts to 3.617395 × 10¹¹ erg/(h·mm²).

Inverse check: 1 erg/(h·mm²) = 6.634608 × 10⁻¹⁰ cal/(s·cm²).

Understanding Calorie (IT)/second/square centimeter and Erg/hour/square millimeter

Calorie (IT)/second/square centimeter

cal/(s·cm²)
Standard Unit

A Calorie (IT)/second/square centimeter (cal/(s·cm²)) is a recognized unit for heat flux density.

Applications & Practical Context

In practical heat flux density terms, a welding oxy-acetylene torch flame concentrated heat flux equals 5 cal/(s·cm²).

Physical Setup

A physical magnitude of 1 cal/(s·cm²) corresponds to 41868 W/m² in standard SI measurement.

Conversion to SI Unit: watt per square meter (W/m²)
1 cal/(s·cm²) = 41868 W/m²

Erg/hour/square millimeter

erg/(h·mm²)
CGS System

An Erg/hour/square millimeter (erg/(h·mm²)) is a unit of heat flux density in the centimeter-gram-second (CGS) system.

Applications & Practical Context

In practical heat flux density terms, a micro-machined MEMS sensor thermal dissipation flux rate equals 36000 erg/(h·mm²).

Physical Setup

A physical magnitude of 1 erg/(h·mm²) corresponds to 2.777778 × 10⁻⁵ W/m² in standard SI measurement.

Conversion to SI Unit: watt per square meter (W/m²)
1 erg/(h·mm²) = 2.777778 × 10⁻⁵ W/m²

Domain Metrology & Engineering Applications

Governing Law & Equation

Thermal Transmission Flux (q = Q̇ / A)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using Schmidt-Boelter heat flux gauges, differential thermopile foil transducers, and calibrated Gardon radiant gauges.

Primary Industry Sectors

Applied across rocket nozzle combustion chamber analysis, fire resistance testing (ASTM E119), furnace wall heat loss auditing, and hypersonic aerothermal design under international metrology standard ISO 80000-5:2019, ASME PTC 19.3.

Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 80000-5:2019, ASME PTC 19.3 and the BIPM SI Brochure (9th Edition). Governed by Thermal Transmission Flux (q = Q̇ / A) under ISO 80000 dimensional vector [M T⁻³].

Multi-Variable Engineering Bridge Thermal Radiation & Power Dissipation

Heat Flux Density to Total Thermal Power Bridge (Watts • Kilowatts • Megawatts • BTU/h • Horsepower)

Calculate total continuous heat dissipation power P = q" × A across surface barriers and exchangers, bridging heat flux density [M T⁻³] with thermal power [M L² T⁻³].

P = q" × A
Vector: [W/m²] × [m²] → [W]
Live Calculated Bridge Equivalent:
1 cal/(s·cm²) at Industrial Hydronic Radiator Panel (8 m²) = 334944 W
Equals 334.944 kW • 0.334944 MW • 449.1673 hp
SI Power
334944
W
Watts
Grid / Utility
334.944
kW
Kilowatts
Power Plant
0.334944
MW
Megawatts
Mechanical Rating
449.1673
hp
Horsepower (Mechanical)
Metric Horsepower
455.3971
PS
Metric Horsepower (PS)
HVAC Thermal Rating
1142876.37
BTU/h
BTU per Hour
  1. 1. Normalize Input to SI Base Unit (W/m²):
    q" = 1 cal/(s·cm²) × 41868 = 41868 W/m²
  2. 2. Apply Engineering Parameter (A):
    Selected condition: Industrial Hydronic Radiator Panel (8 m²) at A = 8 m²
  3. 3. Execute Governing Physical Law in SI Units:
    P = q" × A = (41868 W/m²) × (8 m²) = 334944 W
  4. 4. Convert to Standard Engineering Units:
    • W: 334944 × 1 = 334944 W (Watts) • kW: 334944 × 0.001 = 334.944 kW (Kilowatts) • MW: 334944 × 1 × 10⁻⁶ = 0.334944 MW (Megawatts) • hp: 334944 × 0.001341 = 449.1673 hp (Horsepower (Mechanical)) • PS: 334944 × 0.00136 = 455.3971 PS (Metric Horsepower (PS)) • BTU/h: 334944 × 3.4121 = 1142876.37 BTU/h (BTU per Hour)
Explore Full Power Converter →
Engineering Substance / Operating Standard Parameter Value (m²) Reference State / Condition Typical Industrial & Engineering Application
Residential Window Glazing (4 m²) 4 4.0 m² Double-pane exterior window glass aperture
Industrial Hydronic Radiator Panel (8 m²) 8 8.0 m² Convective space heating radiator surface
Shell & Tube Heat Exchanger (50 m²) 50 50.0 m² Industrial process fluid cooling bundle
Power Boiler Waterwall (200 m²) 200 200.0 m² Thermal power plant steam generator wall
Embed
Need this Calorie (IT)/second/square centimeter to Erg/hour/square millimeter calculator on your website, lab portal, or research blog?
Free HTML Widget 100% Responsive Zero Cookie Tracking
Notice a calculation discrepancy, rounding error, or glitch?
Help us maintain 100% scientific precision and report any issues directly to engineering.

Frequently Asked Questions

There are exactly 1.507248 × 10⁹ ergs/hour/square millimeter (erg/(h·mm²)) in 1 calorie (it)/second/square centimeter (cal/(s·cm²)). To calculate larger amounts manually, simply multiply your total number of calories (it)/second/square centimeter by the conversion multiplier of 1.507248 × 10⁹.

The mathematical formula to convert calories (it)/second/square centimeter to ergs/hour/square millimeter is: [value] * 1.507248 × 10⁹ = ergs/hour/square millimeter. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from ergs/hour/square millimeter back to calories (it)/second/square centimeter, you must divide your starting value by 1.507248 × 10⁹. Our bidirectional tool automatically computes this inverse equation the moment you type into the erg/hour/square millimeter input field.

1 Calorie (IT)/second/square centimeter is larger than 1 Erg/hour/square millimeter. Specifically, 1 Calorie (IT)/second/square centimeter equals exactly 1.507248 × 10⁹ ergs/hour/square millimeter, making it 1.5072 × 10⁹ times larger (a difference of 9.18 orders of magnitude). Therefore, quantities expressed in ergs/hour/square millimeter require a larger numerical value to represent the same physical amount.

Under standard international measurement guidelines, 1 Calorie (IT)/second/square centimeter converts to 1.507248 × 10⁹ ergs/hour/square millimeter. Precise numerical conversion factors ensure consistency across laboratory, engineering, and field data.