Skip to main content
0 results ↑ ↓ navigate, ↵ select

Btus (IT)/hour/square foot to Dynes/hour/centimeter Converter (Btu/(h·ft²) to dyn/(h·cm))

Rate this converter 0 of 0 ratings
Instant calculation with 0ms overhead
Popular Converters
Live Conversion • ISO 80000-5:2019 Certified
1 Btu (IT)/hour/square foot = 113565.26682227 Dyne/hour/centimeter
1 Btu/(h·ft²) = 113565.266822 dyn/(h·cm) • 1 dyn/(h·cm) = 8.805509 × 10⁻⁶ Btu/(h·ft²)
Btu (IT)/hour/square foot to Dyne/hour/centimeter: One Btu (IT)/hour/square foot is equal to 113565.26682227 Dynes/hour/centimeter.
Certified Authority Value
113565.26682227
dyn/(h·cm)
Exact: 1 dyn/(h·cm) ≡ 8.8055091841 × 10⁻⁶ Btu/(h·ft²)
Btu/(h·ft²)
Btu/(h·ft²)
Swap to Dyne/hour/centimeter to Btu (IT)/hour/square foot
Swap to Dyne/hour/centimeter to Btu (IT)/hour/square foot
dyn/(h·cm)
dyn/(h·cm) 113565.26682227
Quick Values:
Conversion Formula
To convert Btu (IT)/hour/square foot to Dyne/hour/centimeter, multiply by 113565.26682227
Btu/(h·ft²) × 113565.26682227 = dyn/(h·cm)

Calculation: 1 Btu/(h·ft²) × 113565.26682227 = 113565.26682227 dyn/(h·cm)

Common Btu (IT)/hour/square foot to Dyne/hour/centimeter Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Btu (IT)/hour/square foot (Btu/(h·ft²)) and Dyne/hour/centimeter (dyn/(h·cm)).

Tap any row to calculate
Btu (IT)/hour/square foot to Dyne/hour/centimeter: Primary Direct Table (15 Steps)
Btu (IT)/hour/square foot to Dyne/hour/centimeter Conversion Reference Table
Conversion & Equivalent Value Scientific Notation
0.001 Btu/(h·ft²) 113.565267 dyn/(h·cm) 1.136 × 10²
0.01 Btu/(h·ft²) 1135.652668 dyn/(h·cm) 1.136 × 10³
0.1 Btu/(h·ft²) 11356.526682 dyn/(h·cm) 1.136 × 10⁴
0.5 Btu/(h·ft²) 56782.633411 dyn/(h·cm) 5.678 × 10⁴
1 Btu/(h·ft²) 113565.266822 dyn/(h·cm) 1.136 × 10⁵
2 Btu/(h·ft²) 227130.533645 dyn/(h·cm) 2.271 × 10⁵
5 Btu/(h·ft²) 567826.334111 dyn/(h·cm) 5.678 × 10⁵
10 Btu/(h·ft²) 1135652.668223 dyn/(h·cm) 1.136 × 10⁶
20 Btu/(h·ft²) 2271305.336445 dyn/(h·cm) 2.271 × 10⁶
25 Btu/(h·ft²) 2839131.670557 dyn/(h·cm) 2.839 × 10⁶
50 Btu/(h·ft²) 5678263.341113 dyn/(h·cm) 5.678 × 10⁶
100 Btu/(h·ft²) 1.135653 × 10⁷ dyn/(h·cm) 1.136 × 10⁷
250 Btu/(h·ft²) 2.839132 × 10⁷ dyn/(h·cm) 2.839 × 10⁷
500 Btu/(h·ft²) 5.678263 × 10⁷ dyn/(h·cm) 5.678 × 10⁷
1000 Btu/(h·ft²) 1.135653 × 10⁸ dyn/(h·cm) 1.136 × 10⁸
Dyne/hour/centimeter to Btu (IT)/hour/square foot: Reciprocal Summary
Dyne/hour/centimeter to Btu (IT)/hour/square foot Conversion Reference Table
Reciprocal & Equivalent Value Scientific Notation
1 dyn/(h·cm) 8.805509 × 10⁻⁶ Btu/(h·ft²) 8.806 × 10⁻⁶
5 dyn/(h·cm) 4.402755 × 10⁻⁵ Btu/(h·ft²) 4.403 × 10⁻⁵
10 dyn/(h·cm) 8.805509 × 10⁻⁵ Btu/(h·ft²) 8.806 × 10⁻⁵
50 dyn/(h·cm) 0.000440275 Btu/(h·ft²) 4.403 × 10⁻⁴
100 dyn/(h·cm) 0.000880551 Btu/(h·ft²) 8.806 × 10⁻⁴
View Complete 15-Row Dyne/hour/centimeter to Btu (IT)/hour/square foot Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Btu (IT)/hour/square foot (Btu/(h·ft²)) and Dyne/hour/centimeter (dyn/(h·cm)):

Btu (IT)/hour/square foot References:

  • Direct summer sunshine striking asphalt shingle roof surface 300 Btu/(h·ft²)
  • Residential cast iron steam heating radiator surface heat flux 240 Btu/(h·ft²)

Dyne/hour/centimeter References:

  • CGS heat flux unit: Low-temperature cryogenic boil-off flux 5000 dyn/(h·cm)

Tap any benchmark above to automatically calculate its exact equivalent in Dyne/hour/centimeter.

ISQ Dimension: [M T⁻³] Coherent SI Unit: watt per square meter (W/m²) Thermodynamics & Heat Transfer

How to Convert Btu (IT)/hour/square foot to Dyne/hour/centimeter

Converting Btu (IT)/hour/square foot (Btu/(h·ft²)) to Dyne/hour/centimeter (dyn/(h·cm)) is a core calculation in Heat Flux Density, which measures the rate of thermal energy transfer radiating or conducting through a unit area per second. This calculation bridges modern MKSA metric standards with the historical Gaussian centimetre-gram-second (CGS) electrostatic and electromagnetic framework. In CGS systems, electromagnetic units (such as statvolts, abvolts, dynes, ergs, and gauss) are formulated directly from mechanical dimensions, with electrostatic-to-electromagnetic relations tied to the speed of light in vacuum (c ≈ 2.99792458 × 1010 cm/s). Exactly 1 Btu (IT)/hour/square foot translates to 113565.266822 Dyne/hour/centimeter (1 dyn/(h·cm) = 8.805509 × 10⁻⁶ Btu/(h·ft²)).

Direct Factor1 Btu/(h·ft²) = 113565.266822 dyn/(h·cm)
Inverse Ratio1 dyn/(h·cm) = 8.805509 × 10⁻⁶ Btu/(h·ft²)
Conversion ScaleSI to CGS Gaussian / ESU / EMU Bridge
First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (watt per square meter (W/m²)) without arbitrary rounding:

Vtarget=Vsource×(ksource→SIktarget→SI)V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)
Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)
1. Source SI Bridge (ksource):1 Btu/(h·ft²) = 3.154591 watt per square meter (W/m²)
2. Target SI Bridge (ktarget):1 dyn/(h·cm) = 2.777778 × 10⁻⁵ watt per square meter (W/m²)
Step-by-step substitution for Btu (IT)/hour/square foot → Dyne/hour/centimeter:V(dyn/(h·cm)) = V(Btu/(h·ft²)) × ( 3.154591 / 2.777778 × 10⁻⁵ ) = V(Btu/(h·ft²)) × 113565.266822
Mathematical FormulaValue in Dyne/hour/centimeter = Value in Btu (IT)/hour/square foot × 113565.26682227Direct computational formula applied for standard conversion.
Worked Example

Converting 8 Btu/(h·ft²) yields an exact output of 908522.134578 dyn/(h·cm) in Dyne/hour/centimeter. Under higher industrial throughput, 480 Btu/(h·ft²) translates to 5.451133 × 10⁷ dyn/(h·cm).

Inverse check: 1 dyn/(h·cm) = 8.805509 × 10⁻⁶ Btu/(h·ft²).

Understanding Btu (IT)/hour/square foot and Dyne/hour/centimeter

Btu (IT)/hour/square foot

Btu/(h·ft²)
Imperial / US

A Btu (IT)/hour/square foot (Btu/(h·ft²)) is an imperial and US customary unit for heat flux density.

Applications & Practical Context

In practical heat flux density terms, a direct summer sunshine striking asphalt shingle roof surface equals 300 Btu/(h·ft²), a residential cast iron steam heating radiator surface heat flux equals 240 Btu/(h·ft²).

Physical Setup

A physical magnitude of 1 Btu/(h·ft²) corresponds to 3.154591 W/m² in standard SI measurement.

Conversion to SI Unit: watt per square meter (W/m²)
1 Btu/(h·ft²) = 3.154591 W/m²

Dyne/hour/centimeter

dyn/(h·cm)
CGS System

A Dyne/hour/centimeter (dyn/(h·cm)) is a unit of heat flux density in the centimeter-gram-second (CGS) system.

Applications & Practical Context

In practical heat flux density terms, a CGS heat flux unit: Low-temperature cryogenic boil-off flux equals 5000 dyn/(h·cm).

Physical Setup

A physical magnitude of 1 dyn/(h·cm) corresponds to 2.777778 × 10⁻⁵ W/m² in standard SI measurement.

Conversion to SI Unit: watt per square meter (W/m²)
1 dyn/(h·cm) = 2.777778 × 10⁻⁵ W/m²

Domain Metrology & Engineering Applications

Governing Law & Equation

Thermal Transmission Flux (q = Q̇ / A)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using Schmidt-Boelter heat flux gauges, differential thermopile foil transducers, and calibrated Gardon radiant gauges.

Primary Industry Sectors

Applied across rocket nozzle combustion chamber analysis, fire resistance testing (ASTM E119), furnace wall heat loss auditing, and hypersonic aerothermal design under international metrology standard ISO 80000-5:2019, ASME PTC 19.3.

Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 80000-5:2019, ASME PTC 19.3 and the BIPM SI Brochure (9th Edition). Governed by Thermal Transmission Flux (q = Q̇ / A) under ISO 80000 dimensional vector [M T⁻³].

Multi-Variable Engineering Bridge Thermal Radiation & Power Dissipation

Heat Flux Density to Total Thermal Power Bridge (Watts • Kilowatts • Megawatts • BTU/h • Horsepower)

Calculate total continuous heat dissipation power P = q" × A across surface barriers and exchangers, bridging heat flux density [M T⁻³] with thermal power [M L² T⁻³].

P = q" × A
Vector: [W/m²] × [m²] → [W]
Live Calculated Bridge Equivalent:
1 Btu/(h·ft²) at Industrial Hydronic Radiator Panel (8 m²) = 25.2367 W
Equals 0.02524 kW • 2.523673 × 10⁻⁵ MW • 0.03384 hp
SI Power
25.2367
W
Watts
Grid / Utility
0.02524
kW
Kilowatts
Power Plant
2.523673 × 10⁻⁵
MW
Megawatts
Mechanical Rating
0.03384
hp
Horsepower (Mechanical)
Metric Horsepower
0.03431
PS
Metric Horsepower (PS)
HVAC Thermal Rating
86.11
BTU/h
BTU per Hour
  1. 1. Normalize Input to SI Base Unit (W/m²):
    q" = 1 Btu/(h·ft²) × 3.15459075 = 3.15459075 W/m²
  2. 2. Apply Engineering Parameter (A):
    Selected condition: Industrial Hydronic Radiator Panel (8 m²) at A = 8 m²
  3. 3. Execute Governing Physical Law in SI Units:
    P = q" × A = (3.15459075 W/m²) × (8 m²) = 25.236726 W
  4. 4. Convert to Standard Engineering Units:
    • W: 25.236726 × 1 = 25.2367 W (Watts) • kW: 25.236726 × 0.001 = 0.02524 kW (Kilowatts) • MW: 25.236726 × 1 × 10⁻⁶ = 2.523673 × 10⁻⁵ MW (Megawatts) • hp: 25.236726 × 0.001341 = 0.03384 hp (Horsepower (Mechanical)) • PS: 25.236726 × 0.00136 = 0.03431 PS (Metric Horsepower (PS)) • BTU/h: 25.236726 × 3.4121 = 86.11 BTU/h (BTU per Hour)
Explore Full Power Converter →
Engineering Substance / Operating Standard Parameter Value (m²) Reference State / Condition Typical Industrial & Engineering Application
Residential Window Glazing (4 m²) 4 4.0 m² Double-pane exterior window glass aperture
Industrial Hydronic Radiator Panel (8 m²) 8 8.0 m² Convective space heating radiator surface
Shell & Tube Heat Exchanger (50 m²) 50 50.0 m² Industrial process fluid cooling bundle
Power Boiler Waterwall (200 m²) 200 200.0 m² Thermal power plant steam generator wall
Embed
Need this Btu (IT)/hour/square foot to Dyne/hour/centimeter calculator on your website, lab portal, or research blog?
Free HTML Widget 100% Responsive Zero Cookie Tracking
Notice a calculation discrepancy, rounding error, or glitch?
Help us maintain 100% scientific precision and report any issues directly to engineering.

Frequently Asked Questions

There are exactly 113565.26682227 dynes/hour/centimeter (dyn/(h·cm)) in 1 btu (it)/hour/square foot (Btu/(h·ft²)). To calculate larger amounts manually, simply multiply your total number of btus (it)/hour/square foot by the conversion multiplier of 113565.26682227.

The mathematical formula to convert btus (it)/hour/square foot to dynes/hour/centimeter is: [value] * 113565.26682227 = dynes/hour/centimeter. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from dynes/hour/centimeter back to btus (it)/hour/square foot, you must divide your starting value by 113565.26682227. Our bidirectional tool automatically computes this inverse equation the moment you type into the dyne/hour/centimeter input field.

1 Btu (IT)/hour/square foot is larger than 1 Dyne/hour/centimeter. Specifically, 1 Btu (IT)/hour/square foot equals exactly 113565.26682227 dynes/hour/centimeter, making it 113565.2668 times larger (a difference of 5.06 orders of magnitude). Therefore, quantities expressed in dynes/hour/centimeter require a larger numerical value to represent the same physical amount.

Under standard international measurement guidelines, 1 Btu (IT)/hour/square foot converts to 113565.26682227 dynes/hour/centimeter. Precise numerical conversion factors ensure consistency across laboratory, engineering, and field data.