Skip to main content
0 results ↑ ↓ navigate, ↵ select

Cubic Meter Hour to Cubic Meter Second Converter & Formula (m³/h to m³/s)

Rate this converter 0 of 0 ratings
Live Conversion • ISO 80000-4:2019 Certified
1 Cubic meter/second = 60000 Liter/minute
1 m³/s = 60000 L/min • 1 L/min = 1.666667 × 10⁻⁵ m³/s
Cubic meter/second to Liter/minute: One Cubic meter/second is equal to 60000 Liters/minute.
Certified Authority Value
60000.00000000
L/min
Exact: 1 L/min ≡ 1.6666666667 × 10⁻⁵ m³/s
m³/s
m³/s
Swap to Liter/minute to Cubic meter/second
L/min
L/min 60000
Quick Values:
1 m³/s 5 m³/s 10 m³/s 25 m³/s 50 m³/s 100 m³/s 250 m³/s 500 m³/s 1,000 m³/s
Conversion Formula
To convert Cubic meter/second to Liter/minute, multiply by 60000
m³/s × 60000 = L/min

Calculation: 1 m³/s × 60000 = 60000 L/min

Common Cubic meter/second to Liter/minute Calculations

Quick-lookup reference table showing calculated equivalents for standard increments between Cubic meter/second (m³/s) and Liter/minute (L/min).

Tap any row to calculate
Liter/minute to Cubic meter/second: Reciprocal Summary
Liter/minute to Cubic meter/second Conversion Reference Table
Reciprocal & Equivalent Value Scientific Notation
1 L/min is equal to 1.666667 × 10⁻⁵ m³/s (Cubic meter/second) 1.667 × 10⁻⁵
5 L/min is equal to 8.333333 × 10⁻⁵ m³/s (Cubic meter/second) 8.333 × 10⁻⁵
10 L/min is equal to 0.000166667 m³/s (Cubic meter/second) 1.667 × 10⁻⁴
50 L/min is equal to 0.000833333 m³/s (Cubic meter/second) 8.333 × 10⁻⁴
100 L/min is equal to 0.00166667 m³/s (Cubic meter/second) 1.667 × 10⁻³
View Complete 15-Row Liter/minute to Cubic meter/second Table

Real-World Context & Everyday Benchmarks

Tap to load into converter

To help contextualize these units in everyday life, science, and engineering, here are verified real-world reference points for Cubic meter/second (m³/s) and Liter/minute (L/min):

Cubic meter/second References:

  • Niagara Falls combined average tourist daytime river discharge flow rate 2400 m³/s
  • Amazon River mouth discharge into Atlantic Ocean (world largest river) 209000 m³/s
  • Municipal regional wastewater treatment plant peak sewage inflow rate 1 m³/s

Liter/minute References:

  • Standard water-saving residential bathroom showerhead water flow limit 9 L/min
  • Standard domestic kitchen sink faucet aerator maximum flow rate 6 L/min
  • Resting adult human pulmonary ventilation air inhalation flow rate 6 L/min

Tap any benchmark above to automatically calculate its exact equivalent in Liter/minute.

ISQ Dimension: [L³ T⁻¹] Coherent SI Unit: cubic meter per second (m³/s) Fluid Dynamics & Rheology

How to Convert Cubic meter/hour to Cubic meter/second

Converting Cubic meter/hour (m³/h) to Cubic meter/second (m³/s) is a core calculation in Volumetric Flow Rate, which quantifies the volume of fluid passing through a designated conduit cross-section per unit of time. Because Cubic meter/second is a broader physical scale than Cubic meter/hour, converting from m³/h to m³/s condenses the numerical figure. It takes 3600 Cubic meter/hour to equal a single Cubic meter/second (1 m³/h = 0.000277778 m³/s). To convert any quantity, multiply by 0.000277778 (or divide by 3600).

Direct Factor1 m³/h = 0.000277778 m³/s
Inverse Ratio1 m³/s = 3600 m³/h
Conversion ScaleDirect Proportional Magnitude Compression
First-Principles SI Derivation ProofNIST SP 811 / ISO 80000 Compliance

Mathematical Conversion Derivation via Coherent SI Base Unit

Under the International System of Quantities (ISQ), dimensional conversion between non-SI units is rigorously resolved by bridging through the coherent SI base unit (cubic meter per second (m³/s)) without arbitrary rounding:

Vtarget=Vsource×(ksource→SIktarget→SI)V_{\text{target}} = V_{\text{source}} \times \left( \frac{k_{\text{source} \to \text{SI}}}{k_{\text{target} \to \text{SI}}} \right)
Universal Dimensional Conversion Law (ISO 80000 / NIST SP 811)
1. Source SI Bridge (ksource):1 m³/h = 0.000277778 cubic meter per second (m³/s)
2. Target SI Bridge (ktarget):1 m³/s = 1 cubic meter per second (m³/s)
Step-by-step substitution for Cubic meter/hour → Cubic meter/second:V(m³/s) = V(m³/h) × ( 0.000277778 / 1 ) = V(m³/h) × 0.000277778
Mathematical FormulaValue in Cubic meter/second = Value in Cubic meter/hour × 0.00027777778Direct computational formula applied for standard conversion.
Worked Example

For an engineering input of 75 m³/h, applying the conversion factor yields exactly 0.0208333 m³/s. At larger operational scale, 100 Cubic meter/hour corresponds to 0.0277778 m³/s.

Inverse check: 1 m³/s = 3600 m³/h.

Understanding Cubic meter/hour and Cubic meter/second

Cubic meter/hour

m³/h
Standard Unit

A Cubic meter/hour (m³/h) is a recognized unit for volumetric flow rate.

Applications & Practical Context

In practical flow terms, a niagara Falls combined average tourist daytime river discharge flow rate equals 8640000 m³/h, a amazon River mouth discharge into Atlantic Ocean (world largest river) equals 7.524 × 10⁸ m³/h, a municipal regional wastewater treatment plant peak sewage inflow rate equals 3600 m³/h.

Physical Setup

A physical magnitude of 1 m³/h corresponds to 0.000277778 m³/s in standard SI measurement.

Conversion to SI Unit: cubic meter per second (m³/s)
1 m³/h = 0.000277778 m³/s

Cubic meter/second

m³/s
Standard Unit

A Cubic meter/second (m³/s) is a recognized unit for volumetric flow rate.

Applications & Practical Context

In practical flow terms, a niagara Falls combined average tourist daytime river discharge flow rate equals 2400 m³/s, a amazon River mouth discharge into Atlantic Ocean (world largest river) equals 209000 m³/s, a municipal regional wastewater treatment plant peak sewage inflow rate equals 1 m³/s.

Physical Setup

A flow rate of 1 m³/s represents 1 Cubic meter/second of fluid volume flowing through a pipe or channel every elapsed second.

Conversion to SI Unit: cubic meter per second (m³/s)
1 m³/s = 1 m³/s

Domain Metrology & Engineering Applications

Governing Law & Equation

Hydrodynamic Continuity Equation (Q = A · v̄)

Measurement Instrumentation

Rigorously quantified in laboratory and field settings using electromagnetic inductive flowmeters, ultrasonic transit-time meters, turbine flowmeters, and differential orifice plates.

Primary Industry Sectors

Applied across municipal water supply distribution, chemical process loops, oil & gas pipeline custody transfer, and HVAC hydronic balancing under international metrology standard ISO 80000-4:2019, ASME MFC-3M.

Physical Orders of Magnitude & Laboratory Reference Benchmarks

Physical Phenomenon / Engineering ReferenceReference ValueConverted to Cubic meter/second
Niagara Falls combined average tourist daytime river discharge flow rate2400 m³/s0.666667 m³/s
Amazon River mouth discharge into Atlantic Ocean (world largest river)209000 m³/s58.055556 m³/s
Municipal regional wastewater treatment plant peak sewage inflow rate1 m³/s0.000277778 m³/s
Institutional Metrology & Standard Authority:

Formulas, conversion coefficients, and base definitions on this page strictly adhere to the ISO 80000-4:2019, ASME MFC-3M and the BIPM SI Brochure (9th Edition). Governed by Hydrodynamic Continuity Equation (Q = A · v̄) under ISO 80000 dimensional vector [L³ T⁻¹].

Multi-Variable Engineering Bridge Precision Fluid Continuity

Volumetric Flow & Fluid Continuity Bridge (GPM • CFM • m³/h • L/min • L/s • ft³/h)

Directly convert mass flow rate (ṁ) into volumetric flow (Q) across process fluids using the thermodynamic continuity equation ṁ = ρ × Q, bridging mass flow [M T⁻¹] and volumetric flow [L³ T⁻¹] via fluid density (ρ).

Q = ṁ / ρ
Live Calculated Bridge Equivalent:
1 m³/s at Water (20°C / Standard Ambient) = 15.8789 GPM
Equals 2.1227 CFM • 3.6065 m³/h • 60.1082 L/min
US Pump Standard
15.8789
GPM
US Gallons per Minute
Air / Gas Flow
2.1227
CFM
Cubic Feet per Minute
Metric Standard
3.6065
m³/h
Cubic Meters per Hour
Hydraulics & Lab
60.1082
L/min
Liters per Minute
High Volume
1.0018
L/s
Liters per Second
Burners & Fuel
127.36
ft³/h
Cubic Feet per Hour
  1. 1. Normalize Input to SI Base Unit (kg/s):
    ṁ = 1 m³/s × 1 = 1 kg/s
  2. 2. Apply Engineering Parameter (ρ):
    Selected condition: Water (20°C / Standard Ambient) at ρ = 998.2 kg/m³
  3. 3. Execute Governing Physical Law in SI Units:
    Q = ṁ / ρ = (1) ÷ (998.2) = 0.0010018 m³/s
  4. 4. Convert to Standard Engineering Units:
    • GPM: 0.0010018 × 15850.3231 = 15.8789 GPM (US Gallons per Minute) • CFM: 0.0010018 × 2118.88 = 2.1227 CFM (Cubic Feet per Minute) • m³/h: 0.0010018 × 3600 = 3.6065 m³/h (Cubic Meters per Hour) • L/min: 0.0010018 × 60000 = 60.1082 L/min (Liters per Minute) • L/s: 0.0010018 × 1000 = 1.0018 L/s (Liters per Second) • ft³/h: 0.0010018 × 127132.8002 = 127.36 ft³/h (Cubic Feet per Hour)
Explore Full Density Converter →
Engineering Substance / Operating Standard Parameter Value (kg/m³) Reference State / Condition Typical Industrial & Engineering Application
Water (20°C / Standard Ambient) 998.2 20°C (68°F), 1 atm Hydronic HVAC & cooling water (NIST)
Water (4°C / Maximum Density) 1000 4°C (39.2°F), 1 atm Pure metrology reference standard (SG = 1.0)
Water (100°C / Saturated Liquid) 958.4 100°C (212°F), 1 atm Boiler condensate returns & district hot water
Saturated Steam (100°C, 1 atm) 0.5977 100°C, 1.01325 bar Boiler steam piping & relief headers (IAPWS-97)
Air (Standard Ambient / NTP 20°C) 1.204 20°C (68°F), 101.325 kPa (ISO 5011) Compressor SCFM rating, blower sizing & HVAC duct air
Air at STP (0°C, 1 atm) 1.292 0°C (32°F), 101.325 kPa (IUPAC) Standard European gas metering & chemical plant feeds
Diesel Fuel (EN 590 / No. 2-D, 20°C) 832 20°C (68°F), ASTM D975 / EN 590 Engine fuel telemetry, BSFC dyno & generator consumption
Gasoline / Petrol (ASTM D4814, 15°C) 740 15°C (59°F), ASTM D4814 Automotive port & direct fuel injector calibrations
Natural Gas / Methane (STP: 0°C, 1 atm) 0.717 0°C, 1 atm (Pure CH₄ approximation) Gas turbine firing rate & burner pipeline supply
Engine Lubricating Oil (SAE 30, 20°C) 885 20°C, typical kinematic grade 100 cSt Engine lube circuits, turbo feed lines & cooling loops
Hydraulic Oil (ISO VG 46, 20°C) 870 20°C, mineral hydraulic fluid Hydraulic power packs, cylinder pump flows & servo valves
Embed
Need this Cubic meter/second to Liter/minute calculator on your website, lab portal, or research blog?
Free HTML Widget 100% Responsive Zero Cookie Tracking
Notice a calculation discrepancy, rounding error, or glitch?
Help us maintain 100% scientific precision and report any issues directly to engineering.

Frequently Asked Questions

There are exactly 0.00027777778 cubic meters/second (m³/s) in 1 cubic meter/hour (m³/h). To calculate larger amounts manually, simply multiply your total number of cubic meters/hour by the conversion multiplier of 0.00027777778.

The mathematical formula to convert cubic meters/hour to cubic meters/second is: [value] * 0.00027777778 = cubic meters/second. Rather than doing the math manually, you can use our high-precision online calculator to process this exact equation instantly without rounding errors.

To perform the reverse calculation from cubic meters/second back to cubic meters/hour, you must divide your starting value by 0.00027777778. Our bidirectional tool automatically computes this inverse equation the moment you type into the cubic meter/second input field.

1 Cubic meter/second is larger than 1 Cubic meter/hour. Specifically, 1 Cubic meter/hour equals 0.00027777778 cubic meters/second, meaning 1 Cubic meter/second is 3600 times larger than 1 Cubic meter/hour (a difference of 3.56 orders of magnitude). Expressing measurements in cubic meters/hour requires a larger numerical value to represent the equivalent physical magnitude.

Under standard international measurement guidelines, 1 Cubic meter/hour converts to 0.00027777778 cubic meters/second. Precise numerical conversion factors ensure consistency across laboratory, engineering, and field data.

There is exactly 1 Cubic Meter Second in 1 Cubic Meter Hour. The baseline identity equation is: 1 Cubic Meter Hour = 1 Cubic Meter Second.

To calculate the conversion, use the formula: V(Cubic Meter Second) = V(Cubic Meter Hour) × 1.

To reverse the conversion, multiply by the inverse factor. The formula is: V(Cubic Meter Hour) = V(Cubic Meter Second) × 1.

High-velocity pipeline systems evaluate volume displacement per second to guarantee continuous yield without cavitation.

Similar Categories